Преглед изворни кода
Added files needed to run ./configure without running autoreconf.
git-svn-id: https://svn.microneil.com/svn/PKG-SNF4CGP-NIX/trunk@92 7ef522f6-be79-40a8-b7df-0a85b3383509master
3 измењених фајлова са 1211 додато и 0 уклоњено
+ 390
- 0
SNF4CGP_Developer_Package/Doc/Makefile.in
Прегледај датотеку
| @@ -0,0 +1,390 @@ | |||
| # Makefile.in generated by automake 1.10.2 from Makefile.am. | |||
| # @configure_input@ | |||
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, | |||
| # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. | |||
| # This Makefile.in is free software; the Free Software Foundation | |||
| # gives unlimited permission to copy and/or distribute it, | |||
| # with or without modifications, as long as this notice is preserved. | |||
| # This program is distributed in the hope that it will be useful, | |||
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without | |||
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A | |||
| # PARTICULAR PURPOSE. | |||
| @SET_MAKE@ | |||
| VPATH = @srcdir@ | |||
| pkgdatadir = $(datadir)/@PACKAGE@ | |||
| pkglibdir = $(libdir)/@PACKAGE@ | |||
| pkgincludedir = $(includedir)/@PACKAGE@ | |||
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd | |||
| install_sh_DATA = $(install_sh) -c -m 644 | |||
| install_sh_PROGRAM = $(install_sh) -c | |||
| install_sh_SCRIPT = $(install_sh) -c | |||
| INSTALL_HEADER = $(INSTALL_DATA) | |||
| transform = $(program_transform_name) | |||
| NORMAL_INSTALL = : | |||
| PRE_INSTALL = : | |||
| POST_INSTALL = : | |||
| NORMAL_UNINSTALL = : | |||
| PRE_UNINSTALL = : | |||
| POST_UNINSTALL = : | |||
| build_triplet = @build@ | |||
| host_triplet = @host@ | |||
| subdir = Doc | |||
| DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in | |||
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 | |||
| am__aclocal_m4_deps = $(top_srcdir)/configure.ac | |||
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ | |||
| $(ACLOCAL_M4) | |||
| mkinstalldirs = $(install_sh) -d | |||
| CONFIG_HEADER = $(top_builddir)/config.h | |||
| CONFIG_CLEAN_FILES = | |||
| SOURCES = | |||
| DIST_SOURCES = | |||
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; | |||
| am__vpath_adj = case $$p in \ | |||
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ | |||
| *) f=$$p;; \ | |||
| esac; | |||
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; | |||
| am__installdirs = "$(DESTDIR)$(docdir)" | |||
| docDATA_INSTALL = $(INSTALL_DATA) | |||
| DATA = $(doc_DATA) | |||
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) | |||
| ACLOCAL = @ACLOCAL@ | |||
| AMTAR = @AMTAR@ | |||
| AR = @AR@ | |||
| AUTOCONF = @AUTOCONF@ | |||
| AUTOHEADER = @AUTOHEADER@ | |||
| AUTOMAKE = @AUTOMAKE@ | |||
| AWK = @AWK@ | |||
| CC = @CC@ | |||
| CCDEPMODE = @CCDEPMODE@ | |||
| CFLAGS = @CFLAGS@ | |||
| CPP = @CPP@ | |||
| CPPFLAGS = @CPPFLAGS@ | |||
| CXX = @CXX@ | |||
| CXXCPP = @CXXCPP@ | |||
| CXXDEPMODE = @CXXDEPMODE@ | |||
| CXXFLAGS = @CXXFLAGS@ | |||
| CYGPATH_W = @CYGPATH_W@ | |||
| DEFS = @DEFS@ | |||
| DEPDIR = @DEPDIR@ | |||
| DSYMUTIL = @DSYMUTIL@ | |||
| DUMPBIN = @DUMPBIN@ | |||
| ECHO_C = @ECHO_C@ | |||
| ECHO_N = @ECHO_N@ | |||
| ECHO_T = @ECHO_T@ | |||
| EGREP = @EGREP@ | |||
| EXEEXT = @EXEEXT@ | |||
| FGREP = @FGREP@ | |||
| GREP = @GREP@ | |||
| INSTALL = @INSTALL@ | |||
| INSTALL_DATA = @INSTALL_DATA@ | |||
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ | |||
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ | |||
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ | |||
| LD = @LD@ | |||
| LDFLAGS = @LDFLAGS@ | |||
| LIBOBJS = @LIBOBJS@ | |||
| LIBS = @LIBS@ | |||
| LIBTOOL = @LIBTOOL@ | |||
| LIPO = @LIPO@ | |||
| LN_S = @LN_S@ | |||
| LTLIBOBJS = @LTLIBOBJS@ | |||
| MAKEINFO = @MAKEINFO@ | |||
| MKDIR_P = @MKDIR_P@ | |||
| NM = @NM@ | |||
| NMEDIT = @NMEDIT@ | |||
| OBJDUMP = @OBJDUMP@ | |||
| OBJEXT = @OBJEXT@ | |||
| OTHER_CXXFLAGS = @OTHER_CXXFLAGS@ | |||
| OTOOL = @OTOOL@ | |||
| OTOOL64 = @OTOOL64@ | |||
| PACKAGE = @PACKAGE@ | |||
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ | |||
| PACKAGE_NAME = @PACKAGE_NAME@ | |||
| PACKAGE_STRING = @PACKAGE_STRING@ | |||
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ | |||
| PACKAGE_VERSION = @PACKAGE_VERSION@ | |||
| PATH_SEPARATOR = @PATH_SEPARATOR@ | |||
| RANLIB = @RANLIB@ | |||
| SED = @SED@ | |||
| SET_MAKE = @SET_MAKE@ | |||
| SHELL = @SHELL@ | |||
| SNF_CXXFLAGS = @SNF_CXXFLAGS@ | |||
| SNF_LIBS = @SNF_LIBS@ | |||
| STRIP = @STRIP@ | |||
| VERSION = @VERSION@ | |||
| abs_builddir = @abs_builddir@ | |||
| abs_srcdir = @abs_srcdir@ | |||
| abs_top_builddir = @abs_top_builddir@ | |||
| abs_top_srcdir = @abs_top_srcdir@ | |||
| ac_ct_CC = @ac_ct_CC@ | |||
| ac_ct_CXX = @ac_ct_CXX@ | |||
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ | |||
| am__include = @am__include@ | |||
| am__leading_dot = @am__leading_dot@ | |||
| am__quote = @am__quote@ | |||
| am__tar = @am__tar@ | |||
| am__untar = @am__untar@ | |||
| bindir = @bindir@ | |||
| build = @build@ | |||
| build_alias = @build_alias@ | |||
| build_cpu = @build_cpu@ | |||
| build_os = @build_os@ | |||
| build_vendor = @build_vendor@ | |||
| builddir = @builddir@ | |||
| datadir = @datadir@ | |||
| datarootdir = @datarootdir@ | |||
| docdir = @docdir@ | |||
| dvidir = @dvidir@ | |||
| exec_prefix = @exec_prefix@ | |||
| haveCURL = @haveCURL@ | |||
| host = @host@ | |||
| host_alias = @host_alias@ | |||
| host_cpu = @host_cpu@ | |||
| host_os = @host_os@ | |||
| host_vendor = @host_vendor@ | |||
| htmldir = @htmldir@ | |||
| includedir = @includedir@ | |||
| infodir = @infodir@ | |||
| install_sh = @install_sh@ | |||
| libdir = @libdir@ | |||
| libexecdir = @libexecdir@ | |||
| localedir = @localedir@ | |||
| localstatedir = @localstatedir@ | |||
| lt_ECHO = @lt_ECHO@ | |||
| mandir = @mandir@ | |||
| mkdir_p = @mkdir_p@ | |||
| oldincludedir = @oldincludedir@ | |||
| pdfdir = @pdfdir@ | |||
| prefix = @prefix@ | |||
| program_transform_name = @program_transform_name@ | |||
| psdir = @psdir@ | |||
| sbindir = @sbindir@ | |||
| sharedstatedir = @sharedstatedir@ | |||
| srcdir = @srcdir@ | |||
| sysconfdir = @sysconfdir@ | |||
| target_alias = @target_alias@ | |||
| top_build_prefix = @top_build_prefix@ | |||
| top_builddir = @top_builddir@ | |||
| top_srcdir = @top_srcdir@ | |||
| doc_DATA = \ | |||
| default.html \ | |||
| README | |||
| EXTRA_DIST = \ | |||
| Makefile.am \ | |||
| AdminStyle.css \ | |||
| GuideStyle.css \ | |||
| DownLoad.gif \ | |||
| DisabledDownLoad.gif \ | |||
| default.html.in \ | |||
| README.in | |||
| CLEANFILES = \ | |||
| $(doc_DATA) | |||
| all: all-am | |||
| .SUFFIXES: | |||
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) | |||
| @for dep in $?; do \ | |||
| case '$(am__configure_deps)' in \ | |||
| *$$dep*) \ | |||
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ | |||
| && { if test -f $@; then exit 0; else break; fi; }; \ | |||
| exit 1;; \ | |||
| esac; \ | |||
| done; \ | |||
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Doc/Makefile'; \ | |||
| cd $(top_srcdir) && \ | |||
| $(AUTOMAKE) --gnu Doc/Makefile | |||
| .PRECIOUS: Makefile | |||
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status | |||
| @case '$?' in \ | |||
| *config.status*) \ | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ | |||
| *) \ | |||
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ | |||
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ | |||
| esac; | |||
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| $(top_srcdir)/configure: $(am__configure_deps) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| mostlyclean-libtool: | |||
| -rm -f *.lo | |||
| clean-libtool: | |||
| -rm -rf .libs _libs | |||
| install-docDATA: $(doc_DATA) | |||
| @$(NORMAL_INSTALL) | |||
| test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" | |||
| @list='$(doc_DATA)'; for p in $$list; do \ | |||
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |||
| f=$(am__strip_dir) \ | |||
| echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ | |||
| $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ | |||
| done | |||
| uninstall-docDATA: | |||
| @$(NORMAL_UNINSTALL) | |||
| @list='$(doc_DATA)'; for p in $$list; do \ | |||
| f=$(am__strip_dir) \ | |||
| echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ | |||
| rm -f "$(DESTDIR)$(docdir)/$$f"; \ | |||
| done | |||
| tags: TAGS | |||
| TAGS: | |||
| ctags: CTAGS | |||
| CTAGS: | |||
| distdir: $(DISTFILES) | |||
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |||
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |||
| list='$(DISTFILES)'; \ | |||
| dist_files=`for file in $$list; do echo $$file; done | \ | |||
| sed -e "s|^$$srcdirstrip/||;t" \ | |||
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ | |||
| case $$dist_files in \ | |||
| */*) $(MKDIR_P) `echo "$$dist_files" | \ | |||
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ | |||
| sort -u` ;; \ | |||
| esac; \ | |||
| for file in $$dist_files; do \ | |||
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ | |||
| if test -d $$d/$$file; then \ | |||
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ | |||
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ | |||
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ | |||
| fi; \ | |||
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ | |||
| else \ | |||
| test -f $(distdir)/$$file \ | |||
| || cp -p $$d/$$file $(distdir)/$$file \ | |||
| || exit 1; \ | |||
| fi; \ | |||
| done | |||
| check-am: all-am | |||
| check: check-am | |||
| all-am: Makefile $(DATA) | |||
| installdirs: | |||
| for dir in "$(DESTDIR)$(docdir)"; do \ | |||
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ | |||
| done | |||
| install: install-am | |||
| install-exec: install-exec-am | |||
| install-data: install-data-am | |||
| uninstall: uninstall-am | |||
| install-am: all-am | |||
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am | |||
| installcheck: installcheck-am | |||
| install-strip: | |||
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ | |||
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ | |||
| `test -z '$(STRIP)' || \ | |||
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install | |||
| mostlyclean-generic: | |||
| clean-generic: | |||
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) | |||
| distclean-generic: | |||
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) | |||
| maintainer-clean-generic: | |||
| @echo "This command is intended for maintainers to use" | |||
| @echo "it deletes files that may require special tools to rebuild." | |||
| clean: clean-am | |||
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am | |||
| distclean: distclean-am | |||
| -rm -f Makefile | |||
| distclean-am: clean-am distclean-generic | |||
| dvi: dvi-am | |||
| dvi-am: | |||
| html: html-am | |||
| info: info-am | |||
| info-am: | |||
| install-data-am: install-docDATA | |||
| install-dvi: install-dvi-am | |||
| install-exec-am: | |||
| install-html: install-html-am | |||
| install-info: install-info-am | |||
| install-man: | |||
| install-pdf: install-pdf-am | |||
| install-ps: install-ps-am | |||
| installcheck-am: | |||
| maintainer-clean: maintainer-clean-am | |||
| -rm -f Makefile | |||
| maintainer-clean-am: distclean-am maintainer-clean-generic | |||
| mostlyclean: mostlyclean-am | |||
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool | |||
| pdf: pdf-am | |||
| pdf-am: | |||
| ps: ps-am | |||
| ps-am: | |||
| uninstall-am: uninstall-docDATA | |||
| .MAKE: install-am install-strip | |||
| .PHONY: all all-am check check-am clean clean-generic clean-libtool \ | |||
| clean-local distclean distclean-generic distclean-libtool \ | |||
| distdir dvi dvi-am html html-am info info-am install \ | |||
| install-am install-data install-data-am install-docDATA \ | |||
| install-dvi install-dvi-am install-exec install-exec-am \ | |||
| install-html install-html-am install-info install-info-am \ | |||
| install-man install-pdf install-pdf-am install-ps \ | |||
| install-ps-am install-strip installcheck installcheck-am \ | |||
| installdirs maintainer-clean maintainer-clean-generic \ | |||
| mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ | |||
| ps ps-am uninstall uninstall-am uninstall-docDATA | |||
| default.html: default.html.in Makefile | |||
| cat @top_srcdir@/Doc/default.html.in | sed -e s+VERSION+@VERSION@+ > $@ | |||
| README: README.in Makefile | |||
| cat @top_srcdir@/Doc/README.in | sed -e s+VERSION+@VERSION@+ > $@ | |||
| clean-local: | |||
| rm -f *.gcno *.gcov *.gcda *~ | |||
| # Tell versions [3.59,3.63) of GNU make to not export all variables. | |||
| # Otherwise a system limit (for SysV at least) may be exceeded. | |||
| .NOEXPORT: | |||
+ 409
- 0
SNF4CGP_Developer_Package/Scripts/Makefile.in
Прегледај датотеку
| @@ -0,0 +1,409 @@ | |||
| # Makefile.in generated by automake 1.10.2 from Makefile.am. | |||
| # @configure_input@ | |||
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, | |||
| # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. | |||
| # This Makefile.in is free software; the Free Software Foundation | |||
| # gives unlimited permission to copy and/or distribute it, | |||
| # with or without modifications, as long as this notice is preserved. | |||
| # This program is distributed in the hope that it will be useful, | |||
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without | |||
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A | |||
| # PARTICULAR PURPOSE. | |||
| @SET_MAKE@ | |||
| VPATH = @srcdir@ | |||
| pkgdatadir = $(datadir)/@PACKAGE@ | |||
| pkglibdir = $(libdir)/@PACKAGE@ | |||
| pkgincludedir = $(includedir)/@PACKAGE@ | |||
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd | |||
| install_sh_DATA = $(install_sh) -c -m 644 | |||
| install_sh_PROGRAM = $(install_sh) -c | |||
| install_sh_SCRIPT = $(install_sh) -c | |||
| INSTALL_HEADER = $(INSTALL_DATA) | |||
| transform = $(program_transform_name) | |||
| NORMAL_INSTALL = : | |||
| PRE_INSTALL = : | |||
| POST_INSTALL = : | |||
| NORMAL_UNINSTALL = : | |||
| PRE_UNINSTALL = : | |||
| POST_UNINSTALL = : | |||
| build_triplet = @build@ | |||
| host_triplet = @host@ | |||
| subdir = Scripts | |||
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in | |||
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 | |||
| am__aclocal_m4_deps = $(top_srcdir)/configure.ac | |||
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ | |||
| $(ACLOCAL_M4) | |||
| mkinstalldirs = $(install_sh) -d | |||
| CONFIG_HEADER = $(top_builddir)/config.h | |||
| CONFIG_CLEAN_FILES = | |||
| am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(pkgdatadir)" | |||
| sbinSCRIPT_INSTALL = $(INSTALL_SCRIPT) | |||
| SCRIPTS = $(sbin_SCRIPTS) | |||
| SOURCES = | |||
| DIST_SOURCES = | |||
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; | |||
| am__vpath_adj = case $$p in \ | |||
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ | |||
| *) f=$$p;; \ | |||
| esac; | |||
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; | |||
| pkgdataDATA_INSTALL = $(INSTALL_DATA) | |||
| DATA = $(pkgdata_DATA) | |||
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) | |||
| ACLOCAL = @ACLOCAL@ | |||
| AMTAR = @AMTAR@ | |||
| AR = @AR@ | |||
| AUTOCONF = @AUTOCONF@ | |||
| AUTOHEADER = @AUTOHEADER@ | |||
| AUTOMAKE = @AUTOMAKE@ | |||
| AWK = @AWK@ | |||
| CC = @CC@ | |||
| CCDEPMODE = @CCDEPMODE@ | |||
| CFLAGS = @CFLAGS@ | |||
| CPP = @CPP@ | |||
| CPPFLAGS = @CPPFLAGS@ | |||
| CXX = @CXX@ | |||
| CXXCPP = @CXXCPP@ | |||
| CXXDEPMODE = @CXXDEPMODE@ | |||
| CXXFLAGS = @CXXFLAGS@ | |||
| CYGPATH_W = @CYGPATH_W@ | |||
| DEFS = @DEFS@ | |||
| DEPDIR = @DEPDIR@ | |||
| DSYMUTIL = @DSYMUTIL@ | |||
| DUMPBIN = @DUMPBIN@ | |||
| ECHO_C = @ECHO_C@ | |||
| ECHO_N = @ECHO_N@ | |||
| ECHO_T = @ECHO_T@ | |||
| EGREP = @EGREP@ | |||
| EXEEXT = @EXEEXT@ | |||
| FGREP = @FGREP@ | |||
| GREP = @GREP@ | |||
| INSTALL = @INSTALL@ | |||
| INSTALL_DATA = @INSTALL_DATA@ | |||
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ | |||
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ | |||
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ | |||
| LD = @LD@ | |||
| LDFLAGS = @LDFLAGS@ | |||
| LIBOBJS = @LIBOBJS@ | |||
| LIBS = @LIBS@ | |||
| LIBTOOL = @LIBTOOL@ | |||
| LIPO = @LIPO@ | |||
| LN_S = @LN_S@ | |||
| LTLIBOBJS = @LTLIBOBJS@ | |||
| MAKEINFO = @MAKEINFO@ | |||
| MKDIR_P = @MKDIR_P@ | |||
| NM = @NM@ | |||
| NMEDIT = @NMEDIT@ | |||
| OBJDUMP = @OBJDUMP@ | |||
| OBJEXT = @OBJEXT@ | |||
| OTHER_CXXFLAGS = @OTHER_CXXFLAGS@ | |||
| OTOOL = @OTOOL@ | |||
| OTOOL64 = @OTOOL64@ | |||
| PACKAGE = @PACKAGE@ | |||
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ | |||
| PACKAGE_NAME = @PACKAGE_NAME@ | |||
| PACKAGE_STRING = @PACKAGE_STRING@ | |||
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ | |||
| PACKAGE_VERSION = @PACKAGE_VERSION@ | |||
| PATH_SEPARATOR = @PATH_SEPARATOR@ | |||
| RANLIB = @RANLIB@ | |||
| SED = @SED@ | |||
| SET_MAKE = @SET_MAKE@ | |||
| SHELL = @SHELL@ | |||
| SNF_CXXFLAGS = @SNF_CXXFLAGS@ | |||
| SNF_LIBS = @SNF_LIBS@ | |||
| STRIP = @STRIP@ | |||
| VERSION = @VERSION@ | |||
| abs_builddir = @abs_builddir@ | |||
| abs_srcdir = @abs_srcdir@ | |||
| abs_top_builddir = @abs_top_builddir@ | |||
| abs_top_srcdir = @abs_top_srcdir@ | |||
| ac_ct_CC = @ac_ct_CC@ | |||
| ac_ct_CXX = @ac_ct_CXX@ | |||
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ | |||
| am__include = @am__include@ | |||
| am__leading_dot = @am__leading_dot@ | |||
| am__quote = @am__quote@ | |||
| am__tar = @am__tar@ | |||
| am__untar = @am__untar@ | |||
| bindir = @bindir@ | |||
| build = @build@ | |||
| build_alias = @build_alias@ | |||
| build_cpu = @build_cpu@ | |||
| build_os = @build_os@ | |||
| build_vendor = @build_vendor@ | |||
| builddir = @builddir@ | |||
| datadir = @datadir@ | |||
| datarootdir = @datarootdir@ | |||
| docdir = @docdir@ | |||
| dvidir = @dvidir@ | |||
| exec_prefix = @exec_prefix@ | |||
| haveCURL = @haveCURL@ | |||
| host = @host@ | |||
| host_alias = @host_alias@ | |||
| host_cpu = @host_cpu@ | |||
| host_os = @host_os@ | |||
| host_vendor = @host_vendor@ | |||
| htmldir = @htmldir@ | |||
| includedir = @includedir@ | |||
| infodir = @infodir@ | |||
| install_sh = @install_sh@ | |||
| libdir = @libdir@ | |||
| libexecdir = @libexecdir@ | |||
| localedir = @localedir@ | |||
| localstatedir = @localstatedir@ | |||
| lt_ECHO = @lt_ECHO@ | |||
| mandir = @mandir@ | |||
| mkdir_p = @mkdir_p@ | |||
| oldincludedir = @oldincludedir@ | |||
| pdfdir = @pdfdir@ | |||
| prefix = @prefix@ | |||
| program_transform_name = @program_transform_name@ | |||
| psdir = @psdir@ | |||
| sbindir = @sbindir@ | |||
| sharedstatedir = @sharedstatedir@ | |||
| srcdir = @srcdir@ | |||
| sysconfdir = @sysconfdir@ | |||
| target_alias = @target_alias@ | |||
| top_build_prefix = @top_build_prefix@ | |||
| top_builddir = @top_builddir@ | |||
| top_srcdir = @top_srcdir@ | |||
| sbin_SCRIPTS = \ | |||
| getRulebase.sample | |||
| pkgdata_DATA = \ | |||
| junkmsg.txt \ | |||
| cleanmsg.txt | |||
| EXTRA_DIST = \ | |||
| getRulebase.in \ | |||
| $(pkgdata_DATA) | |||
| CLEANFILES = \ | |||
| $(sbin_SCRIPTS) | |||
| all: all-am | |||
| .SUFFIXES: | |||
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) | |||
| @for dep in $?; do \ | |||
| case '$(am__configure_deps)' in \ | |||
| *$$dep*) \ | |||
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ | |||
| && { if test -f $@; then exit 0; else break; fi; }; \ | |||
| exit 1;; \ | |||
| esac; \ | |||
| done; \ | |||
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Scripts/Makefile'; \ | |||
| cd $(top_srcdir) && \ | |||
| $(AUTOMAKE) --gnu Scripts/Makefile | |||
| .PRECIOUS: Makefile | |||
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status | |||
| @case '$?' in \ | |||
| *config.status*) \ | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ | |||
| *) \ | |||
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ | |||
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ | |||
| esac; | |||
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| $(top_srcdir)/configure: $(am__configure_deps) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| install-sbinSCRIPTS: $(sbin_SCRIPTS) | |||
| @$(NORMAL_INSTALL) | |||
| test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)" | |||
| @list='$(sbin_SCRIPTS)'; for p in $$list; do \ | |||
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |||
| if test -f $$d$$p; then \ | |||
| f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ | |||
| echo " $(sbinSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ | |||
| $(sbinSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(sbindir)/$$f"; \ | |||
| else :; fi; \ | |||
| done | |||
| uninstall-sbinSCRIPTS: | |||
| @$(NORMAL_UNINSTALL) | |||
| @list='$(sbin_SCRIPTS)'; for p in $$list; do \ | |||
| f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \ | |||
| echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ | |||
| rm -f "$(DESTDIR)$(sbindir)/$$f"; \ | |||
| done | |||
| mostlyclean-libtool: | |||
| -rm -f *.lo | |||
| clean-libtool: | |||
| -rm -rf .libs _libs | |||
| install-pkgdataDATA: $(pkgdata_DATA) | |||
| @$(NORMAL_INSTALL) | |||
| test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" | |||
| @list='$(pkgdata_DATA)'; for p in $$list; do \ | |||
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |||
| f=$(am__strip_dir) \ | |||
| echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ | |||
| $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ | |||
| done | |||
| uninstall-pkgdataDATA: | |||
| @$(NORMAL_UNINSTALL) | |||
| @list='$(pkgdata_DATA)'; for p in $$list; do \ | |||
| f=$(am__strip_dir) \ | |||
| echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ | |||
| rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ | |||
| done | |||
| tags: TAGS | |||
| TAGS: | |||
| ctags: CTAGS | |||
| CTAGS: | |||
| distdir: $(DISTFILES) | |||
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |||
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |||
| list='$(DISTFILES)'; \ | |||
| dist_files=`for file in $$list; do echo $$file; done | \ | |||
| sed -e "s|^$$srcdirstrip/||;t" \ | |||
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ | |||
| case $$dist_files in \ | |||
| */*) $(MKDIR_P) `echo "$$dist_files" | \ | |||
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ | |||
| sort -u` ;; \ | |||
| esac; \ | |||
| for file in $$dist_files; do \ | |||
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ | |||
| if test -d $$d/$$file; then \ | |||
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ | |||
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ | |||
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ | |||
| fi; \ | |||
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ | |||
| else \ | |||
| test -f $(distdir)/$$file \ | |||
| || cp -p $$d/$$file $(distdir)/$$file \ | |||
| || exit 1; \ | |||
| fi; \ | |||
| done | |||
| check-am: all-am | |||
| check: check-am | |||
| all-am: Makefile $(SCRIPTS) $(DATA) | |||
| installdirs: | |||
| for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(pkgdatadir)"; do \ | |||
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ | |||
| done | |||
| install: install-am | |||
| install-exec: install-exec-am | |||
| install-data: install-data-am | |||
| uninstall: uninstall-am | |||
| install-am: all-am | |||
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am | |||
| installcheck: installcheck-am | |||
| install-strip: | |||
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ | |||
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ | |||
| `test -z '$(STRIP)' || \ | |||
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install | |||
| mostlyclean-generic: | |||
| clean-generic: | |||
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) | |||
| distclean-generic: | |||
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) | |||
| maintainer-clean-generic: | |||
| @echo "This command is intended for maintainers to use" | |||
| @echo "it deletes files that may require special tools to rebuild." | |||
| clean: clean-am | |||
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am | |||
| distclean: distclean-am | |||
| -rm -f Makefile | |||
| distclean-am: clean-am distclean-generic | |||
| dvi: dvi-am | |||
| dvi-am: | |||
| html: html-am | |||
| info: info-am | |||
| info-am: | |||
| install-data-am: install-pkgdataDATA | |||
| install-dvi: install-dvi-am | |||
| install-exec-am: install-sbinSCRIPTS | |||
| install-html: install-html-am | |||
| install-info: install-info-am | |||
| install-man: | |||
| install-pdf: install-pdf-am | |||
| install-ps: install-ps-am | |||
| installcheck-am: | |||
| maintainer-clean: maintainer-clean-am | |||
| -rm -f Makefile | |||
| maintainer-clean-am: distclean-am maintainer-clean-generic | |||
| mostlyclean: mostlyclean-am | |||
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool | |||
| pdf: pdf-am | |||
| pdf-am: | |||
| ps: ps-am | |||
| ps-am: | |||
| uninstall-am: uninstall-pkgdataDATA uninstall-sbinSCRIPTS | |||
| .MAKE: install-am install-strip | |||
| .PHONY: all all-am check check-am clean clean-generic clean-libtool \ | |||
| clean-local distclean distclean-generic distclean-libtool \ | |||
| distdir dvi dvi-am html html-am info info-am install \ | |||
| install-am install-data install-data-am install-dvi \ | |||
| install-dvi-am install-exec install-exec-am install-html \ | |||
| install-html-am install-info install-info-am install-man \ | |||
| install-pdf install-pdf-am install-pkgdataDATA install-ps \ | |||
| install-ps-am install-sbinSCRIPTS install-strip installcheck \ | |||
| installcheck-am installdirs maintainer-clean \ | |||
| maintainer-clean-generic mostlyclean mostlyclean-generic \ | |||
| mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ | |||
| uninstall-pkgdataDATA uninstall-sbinSCRIPTS | |||
| getRulebase.sample: getRulebase.in Makefile | |||
| cp @top_srcdir@/Scripts/getRulebase.in $@ | |||
| chmod +x $@ | |||
| clean-local: | |||
| rm -f *.gcno *.gcov *.gcda *~ | |||
| # Tell versions [3.59,3.63) of GNU make to not export all variables. | |||
| # Otherwise a system limit (for SysV at least) may be exceeded. | |||
| .NOEXPORT: | |||
+ 412
- 0
SNF4CGP_Developer_Package/config_files/Makefile.in
Прегледај датотеку
| @@ -0,0 +1,412 @@ | |||
| # Makefile.in generated by automake 1.10.2 from Makefile.am. | |||
| # @configure_input@ | |||
| # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, | |||
| # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. | |||
| # This Makefile.in is free software; the Free Software Foundation | |||
| # gives unlimited permission to copy and/or distribute it, | |||
| # with or without modifications, as long as this notice is preserved. | |||
| # This program is distributed in the hope that it will be useful, | |||
| # but WITHOUT ANY WARRANTY, to the extent permitted by law; without | |||
| # even the implied warranty of MERCHANTABILITY or FITNESS FOR A | |||
| # PARTICULAR PURPOSE. | |||
| @SET_MAKE@ | |||
| VPATH = @srcdir@ | |||
| pkgdatadir = $(datadir)/@PACKAGE@ | |||
| pkglibdir = $(libdir)/@PACKAGE@ | |||
| pkgincludedir = $(includedir)/@PACKAGE@ | |||
| am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd | |||
| install_sh_DATA = $(install_sh) -c -m 644 | |||
| install_sh_PROGRAM = $(install_sh) -c | |||
| install_sh_SCRIPT = $(install_sh) -c | |||
| INSTALL_HEADER = $(INSTALL_DATA) | |||
| transform = $(program_transform_name) | |||
| NORMAL_INSTALL = : | |||
| PRE_INSTALL = : | |||
| POST_INSTALL = : | |||
| NORMAL_UNINSTALL = : | |||
| PRE_UNINSTALL = : | |||
| POST_UNINSTALL = : | |||
| build_triplet = @build@ | |||
| host_triplet = @host@ | |||
| subdir = config_files | |||
| DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in | |||
| ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 | |||
| am__aclocal_m4_deps = $(top_srcdir)/configure.ac | |||
| am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ | |||
| $(ACLOCAL_M4) | |||
| mkinstalldirs = $(install_sh) -d | |||
| CONFIG_HEADER = $(top_builddir)/config.h | |||
| CONFIG_CLEAN_FILES = | |||
| SOURCES = | |||
| DIST_SOURCES = | |||
| am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; | |||
| am__vpath_adj = case $$p in \ | |||
| $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ | |||
| *) f=$$p;; \ | |||
| esac; | |||
| am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; | |||
| am__installdirs = "$(DESTDIR)$(pkgdatadir)" \ | |||
| "$(DESTDIR)$(sampleconfdir)" | |||
| pkgdataDATA_INSTALL = $(INSTALL_DATA) | |||
| sampleconfDATA_INSTALL = $(INSTALL_DATA) | |||
| DATA = $(pkgdata_DATA) $(sampleconf_DATA) | |||
| DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) | |||
| ACLOCAL = @ACLOCAL@ | |||
| AMTAR = @AMTAR@ | |||
| AR = @AR@ | |||
| AUTOCONF = @AUTOCONF@ | |||
| AUTOHEADER = @AUTOHEADER@ | |||
| AUTOMAKE = @AUTOMAKE@ | |||
| AWK = @AWK@ | |||
| CC = @CC@ | |||
| CCDEPMODE = @CCDEPMODE@ | |||
| CFLAGS = @CFLAGS@ | |||
| CPP = @CPP@ | |||
| CPPFLAGS = @CPPFLAGS@ | |||
| CXX = @CXX@ | |||
| CXXCPP = @CXXCPP@ | |||
| CXXDEPMODE = @CXXDEPMODE@ | |||
| CXXFLAGS = @CXXFLAGS@ | |||
| CYGPATH_W = @CYGPATH_W@ | |||
| DEFS = @DEFS@ | |||
| DEPDIR = @DEPDIR@ | |||
| DSYMUTIL = @DSYMUTIL@ | |||
| DUMPBIN = @DUMPBIN@ | |||
| ECHO_C = @ECHO_C@ | |||
| ECHO_N = @ECHO_N@ | |||
| ECHO_T = @ECHO_T@ | |||
| EGREP = @EGREP@ | |||
| EXEEXT = @EXEEXT@ | |||
| FGREP = @FGREP@ | |||
| GREP = @GREP@ | |||
| INSTALL = @INSTALL@ | |||
| INSTALL_DATA = @INSTALL_DATA@ | |||
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ | |||
| INSTALL_SCRIPT = @INSTALL_SCRIPT@ | |||
| INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ | |||
| LD = @LD@ | |||
| LDFLAGS = @LDFLAGS@ | |||
| LIBOBJS = @LIBOBJS@ | |||
| LIBS = @LIBS@ | |||
| LIBTOOL = @LIBTOOL@ | |||
| LIPO = @LIPO@ | |||
| LN_S = @LN_S@ | |||
| LTLIBOBJS = @LTLIBOBJS@ | |||
| MAKEINFO = @MAKEINFO@ | |||
| MKDIR_P = @MKDIR_P@ | |||
| NM = @NM@ | |||
| NMEDIT = @NMEDIT@ | |||
| OBJDUMP = @OBJDUMP@ | |||
| OBJEXT = @OBJEXT@ | |||
| OTHER_CXXFLAGS = @OTHER_CXXFLAGS@ | |||
| OTOOL = @OTOOL@ | |||
| OTOOL64 = @OTOOL64@ | |||
| PACKAGE = @PACKAGE@ | |||
| PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ | |||
| PACKAGE_NAME = @PACKAGE_NAME@ | |||
| PACKAGE_STRING = @PACKAGE_STRING@ | |||
| PACKAGE_TARNAME = @PACKAGE_TARNAME@ | |||
| PACKAGE_VERSION = @PACKAGE_VERSION@ | |||
| PATH_SEPARATOR = @PATH_SEPARATOR@ | |||
| RANLIB = @RANLIB@ | |||
| SED = @SED@ | |||
| SET_MAKE = @SET_MAKE@ | |||
| SHELL = @SHELL@ | |||
| SNF_CXXFLAGS = @SNF_CXXFLAGS@ | |||
| SNF_LIBS = @SNF_LIBS@ | |||
| STRIP = @STRIP@ | |||
| VERSION = @VERSION@ | |||
| abs_builddir = @abs_builddir@ | |||
| abs_srcdir = @abs_srcdir@ | |||
| abs_top_builddir = @abs_top_builddir@ | |||
| abs_top_srcdir = @abs_top_srcdir@ | |||
| ac_ct_CC = @ac_ct_CC@ | |||
| ac_ct_CXX = @ac_ct_CXX@ | |||
| ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ | |||
| am__include = @am__include@ | |||
| am__leading_dot = @am__leading_dot@ | |||
| am__quote = @am__quote@ | |||
| am__tar = @am__tar@ | |||
| am__untar = @am__untar@ | |||
| bindir = @bindir@ | |||
| build = @build@ | |||
| build_alias = @build_alias@ | |||
| build_cpu = @build_cpu@ | |||
| build_os = @build_os@ | |||
| build_vendor = @build_vendor@ | |||
| builddir = @builddir@ | |||
| datadir = @datadir@ | |||
| datarootdir = @datarootdir@ | |||
| docdir = @docdir@ | |||
| dvidir = @dvidir@ | |||
| exec_prefix = @exec_prefix@ | |||
| haveCURL = @haveCURL@ | |||
| host = @host@ | |||
| host_alias = @host_alias@ | |||
| host_cpu = @host_cpu@ | |||
| host_os = @host_os@ | |||
| host_vendor = @host_vendor@ | |||
| htmldir = @htmldir@ | |||
| includedir = @includedir@ | |||
| infodir = @infodir@ | |||
| install_sh = @install_sh@ | |||
| libdir = @libdir@ | |||
| libexecdir = @libexecdir@ | |||
| localedir = @localedir@ | |||
| localstatedir = @localstatedir@ | |||
| lt_ECHO = @lt_ECHO@ | |||
| mandir = @mandir@ | |||
| mkdir_p = @mkdir_p@ | |||
| oldincludedir = @oldincludedir@ | |||
| pdfdir = @pdfdir@ | |||
| prefix = @prefix@ | |||
| program_transform_name = @program_transform_name@ | |||
| psdir = @psdir@ | |||
| sbindir = @sbindir@ | |||
| sharedstatedir = @sharedstatedir@ | |||
| srcdir = @srcdir@ | |||
| sysconfdir = @sysconfdir@ | |||
| target_alias = @target_alias@ | |||
| top_build_prefix = @top_build_prefix@ | |||
| top_builddir = @top_builddir@ | |||
| top_srcdir = @top_srcdir@ | |||
| CONFDATA = \ | |||
| snf_engine.xml.sample \ | |||
| identity.xml.sample | |||
| sampleconfdir = @sysconfdir@/@PACKAGE_NAME@ | |||
| sampleconf_DATA = $(CONFDATA) | |||
| pkgdata_DATA = \ | |||
| GBUdbIgnoreList.txt.sample | |||
| EXTRA_DIST = \ | |||
| snf_engine.xml.sample.in \ | |||
| identity.xml.sample.in \ | |||
| GBUdbIgnoreList.txt.sample \ | |||
| Makefile.am | |||
| CLEANFILES = \ | |||
| $(CONFDATA) | |||
| all: all-am | |||
| .SUFFIXES: | |||
| $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) | |||
| @for dep in $?; do \ | |||
| case '$(am__configure_deps)' in \ | |||
| *$$dep*) \ | |||
| ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ | |||
| && { if test -f $@; then exit 0; else break; fi; }; \ | |||
| exit 1;; \ | |||
| esac; \ | |||
| done; \ | |||
| echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu config_files/Makefile'; \ | |||
| cd $(top_srcdir) && \ | |||
| $(AUTOMAKE) --gnu config_files/Makefile | |||
| .PRECIOUS: Makefile | |||
| Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status | |||
| @case '$?' in \ | |||
| *config.status*) \ | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ | |||
| *) \ | |||
| echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ | |||
| cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ | |||
| esac; | |||
| $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| $(top_srcdir)/configure: $(am__configure_deps) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| $(ACLOCAL_M4): $(am__aclocal_m4_deps) | |||
| cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh | |||
| mostlyclean-libtool: | |||
| -rm -f *.lo | |||
| clean-libtool: | |||
| -rm -rf .libs _libs | |||
| install-pkgdataDATA: $(pkgdata_DATA) | |||
| @$(NORMAL_INSTALL) | |||
| test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" | |||
| @list='$(pkgdata_DATA)'; for p in $$list; do \ | |||
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |||
| f=$(am__strip_dir) \ | |||
| echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \ | |||
| $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \ | |||
| done | |||
| uninstall-pkgdataDATA: | |||
| @$(NORMAL_UNINSTALL) | |||
| @list='$(pkgdata_DATA)'; for p in $$list; do \ | |||
| f=$(am__strip_dir) \ | |||
| echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \ | |||
| rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \ | |||
| done | |||
| install-sampleconfDATA: $(sampleconf_DATA) | |||
| @$(NORMAL_INSTALL) | |||
| test -z "$(sampleconfdir)" || $(MKDIR_P) "$(DESTDIR)$(sampleconfdir)" | |||
| @list='$(sampleconf_DATA)'; for p in $$list; do \ | |||
| if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ | |||
| f=$(am__strip_dir) \ | |||
| echo " $(sampleconfDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(sampleconfdir)/$$f'"; \ | |||
| $(sampleconfDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(sampleconfdir)/$$f"; \ | |||
| done | |||
| uninstall-sampleconfDATA: | |||
| @$(NORMAL_UNINSTALL) | |||
| @list='$(sampleconf_DATA)'; for p in $$list; do \ | |||
| f=$(am__strip_dir) \ | |||
| echo " rm -f '$(DESTDIR)$(sampleconfdir)/$$f'"; \ | |||
| rm -f "$(DESTDIR)$(sampleconfdir)/$$f"; \ | |||
| done | |||
| tags: TAGS | |||
| TAGS: | |||
| ctags: CTAGS | |||
| CTAGS: | |||
| distdir: $(DISTFILES) | |||
| @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |||
| topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ | |||
| list='$(DISTFILES)'; \ | |||
| dist_files=`for file in $$list; do echo $$file; done | \ | |||
| sed -e "s|^$$srcdirstrip/||;t" \ | |||
| -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ | |||
| case $$dist_files in \ | |||
| */*) $(MKDIR_P) `echo "$$dist_files" | \ | |||
| sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ | |||
| sort -u` ;; \ | |||
| esac; \ | |||
| for file in $$dist_files; do \ | |||
| if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ | |||
| if test -d $$d/$$file; then \ | |||
| dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ | |||
| if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ | |||
| cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ | |||
| fi; \ | |||
| cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ | |||
| else \ | |||
| test -f $(distdir)/$$file \ | |||
| || cp -p $$d/$$file $(distdir)/$$file \ | |||
| || exit 1; \ | |||
| fi; \ | |||
| done | |||
| check-am: all-am | |||
| check: check-am | |||
| all-am: Makefile $(DATA) | |||
| installdirs: | |||
| for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(sampleconfdir)"; do \ | |||
| test -z "$$dir" || $(MKDIR_P) "$$dir"; \ | |||
| done | |||
| install: install-am | |||
| install-exec: install-exec-am | |||
| install-data: install-data-am | |||
| uninstall: uninstall-am | |||
| install-am: all-am | |||
| @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am | |||
| installcheck: installcheck-am | |||
| install-strip: | |||
| $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ | |||
| install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ | |||
| `test -z '$(STRIP)' || \ | |||
| echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install | |||
| mostlyclean-generic: | |||
| clean-generic: | |||
| -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) | |||
| distclean-generic: | |||
| -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) | |||
| maintainer-clean-generic: | |||
| @echo "This command is intended for maintainers to use" | |||
| @echo "it deletes files that may require special tools to rebuild." | |||
| clean: clean-am | |||
| clean-am: clean-generic clean-libtool clean-local mostlyclean-am | |||
| distclean: distclean-am | |||
| -rm -f Makefile | |||
| distclean-am: clean-am distclean-generic | |||
| dvi: dvi-am | |||
| dvi-am: | |||
| html: html-am | |||
| info: info-am | |||
| info-am: | |||
| install-data-am: install-pkgdataDATA install-sampleconfDATA | |||
| install-dvi: install-dvi-am | |||
| install-exec-am: | |||
| install-html: install-html-am | |||
| install-info: install-info-am | |||
| install-man: | |||
| install-pdf: install-pdf-am | |||
| install-ps: install-ps-am | |||
| installcheck-am: | |||
| maintainer-clean: maintainer-clean-am | |||
| -rm -f Makefile | |||
| maintainer-clean-am: distclean-am maintainer-clean-generic | |||
| mostlyclean: mostlyclean-am | |||
| mostlyclean-am: mostlyclean-generic mostlyclean-libtool | |||
| pdf: pdf-am | |||
| pdf-am: | |||
| ps: ps-am | |||
| ps-am: | |||
| uninstall-am: uninstall-pkgdataDATA uninstall-sampleconfDATA | |||
| .MAKE: install-am install-strip | |||
| .PHONY: all all-am check check-am clean clean-generic clean-libtool \ | |||
| clean-local distclean distclean-generic distclean-libtool \ | |||
| distdir dvi dvi-am html html-am info info-am install \ | |||
| install-am install-data install-data-am install-dvi \ | |||
| install-dvi-am install-exec install-exec-am install-html \ | |||
| install-html-am install-info install-info-am install-man \ | |||
| install-pdf install-pdf-am install-pkgdataDATA install-ps \ | |||
| install-ps-am install-sampleconfDATA install-strip \ | |||
| installcheck installcheck-am installdirs maintainer-clean \ | |||
| maintainer-clean-generic mostlyclean mostlyclean-generic \ | |||
| mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ | |||
| uninstall-pkgdataDATA uninstall-sampleconfDATA | |||
| snf_engine.xml.sample: snf_engine.xml.sample.in Makefile | |||
| cp @top_srcdir@/config_files/snf_engine.xml.sample.in $@ | |||
| identity.xml.sample: identity.xml.sample.in | |||
| cp @top_srcdir@/config_files/identity.xml.sample.in $@ | |||
| clean-local: | |||
| rm -f *.gcno *.gcov *.gcda *~ | |||
| # Tell versions [3.59,3.63) of GNU make to not export all variables. | |||
| # Otherwise a system limit (for SysV at least) may be exceeded. | |||
| .NOEXPORT: | |||
Loading…