git-svn-id: https://svn.microneil.com/svn/SNFMDaemon/trunk@1 13d20bd5-6e17-40a7-8d3d-b09f2b4ffc6d

Distribution_20090514/About-Wget-and-Gzip.txt

@@ -0,0 +1,4 @@
+Included with this distribution are the open-source "wget" and "gzip" files.  They are
+used in getRulebase.bat to download and decompress rulebase files. The "wget" and "gzip"
+utilities included here came from http://unxutils.sourceforge.net/ and are included only
+for your convenience.

Distribution_20090514/ChangeLog.txt

@@ -0,0 +1,449 @@
+SNF MDaemon Plugin Change Log...
+------------------------------------------------------------------------------
+
+20080626 - Version 3.0, It's official.
+
+Changed build information.
+Removed extraneous comments from configuration file.
+
+20080524 - Version V2-9rc6.25.7
+
+Optimized networking library for additional speed & stability by moving
+receive buffer allocation from heap to stack (automatic).
+
+Optimized timing parameters in SNFClient for improved speed. Polling dealys
+are now reduced to 10ms from 30ms.
+
+Removed speed-bug in SNFClient, 100ms guard time between retries was always
+executed after an attempt (even a successful attempt). The guard time is now
+condition and only fires on unsuccessful attempts.
+
+Updated XCI server logic to ensure non-blocking sockets for clients in all
+socket implementations.
+
+20080424 - Version V2-9rc6.24.6
+
+Refactored snfScanData.clear() to reduce heap work and fragments.
+
+Added mutex to scanMessageFile() entry point just in case some app attempts to
+put multiple threads through a single engine handler. scanMessage() is already
+protected and fully wraped by the new scanMessageFile() mutex.
+
+Added non-specific runtime exception handling to XHDR injection code.
+
+Added 2 retries w/ 300ms delay to remove original message in XHDR inject code.
+If remove fails after 3 attempts the injector throws.
+
+Added 2 retries w/ 300ms delay to rename temp file to msg in XHDR inject code.
+If rename fails after 3 attempts the injector throws.
+
+Added IPTest logging.
+
+20080416 - Version V2-9rc5.23.6
+
+Fixed bug where SNCY open() would fail on some Win* platforms with
+WSAEINVAL instead of the standard EINPROGRESS or EALREADY which were expected.
+Also added WSAEWOULDBLOCK to cover other "ambiguities" in windows sockets
+implementations. InProgress() on Win* now test for any of:
+
+WSAEINPROGRESS, WSAEALREADY, WSAEWOULDBLOCK, WSAEINVAL
+
+20080413 - Version V2-9rc5.22.6
+
+Fixed bug in TCPHost.open() where EALREADY was not counted as a version of
+EINPROGRESS. This would cause open() to throw an unnecessary exception when
+an open() required extra time.
+
+20080413 - Version V2-9rc5.21.6
+
+Extended timeout for SYNC session open() to the full session length. This way
+if a session takes a long time to open it still has a shot at success.
+
+20080411 - Version V2-9rc5.20.6
+
+Adjusted snfNETmgr to use non-blocking open in SYNC sessions. Open timeout
+is 1/3 of the session timeout. Session timeout is 2 * Session pacing. Open
+polling uses golden spiral delay from 10ms to 340ms.
+
+20080410 - Version V2-9rc5.19.6
+
+Adjusted XCI manager to use new snfCFGPacket paradigm in checkCFG().
+
+Adjusted snf_RulebaseHandler::addRulePanic() to use MyMutex and eliminated
+the AutoPanicMutex and waiting scheme.
+
+Refactored scanMessage() to use a ScopeMutex() rather than lock()/unlock().
+
+Refactored scanMessage() to use MyCFGPacket.isRulePanic() test.
+
+Redesigned snfCFGPacket handling to automate grab() / drop() functions.
+
+Fixed lock-up bug: Redesigned AutoPanic posting and checking mechanisms to 
+eliminate potential dead-lock condition. Under some conditions a precisely
+timed auto-panic posting could cause the RulebaesHandler mutex and the 
+AutoPanicMutex to become intertwined leading to a cascading deadlock. When
+this occurred all XCI processing threads and eventually the XCI listener
+thread would become blocked waiting to get the current configuration.
+
+20080409 - Version V2-9rc5.18.6
+
+Enhanced XCI exception handling and logging to provide additional detail.
+
+Added code to explicitely check for zero length files in scanMessagFile().
+Previously a zero length file would cause the CBFR module of the filter
+chain to throw an invalid buffer exception. Now if the message file is empty
+scanMessageFile() will throw a FileError stating FileEmpty!.
+
+20080407 - Version V2-9rc5.17.6
+
+Enhanced exception reporting in snfXCImrg
+
+20080405 - Version V2-9rc5.16.6
+
+Reduced safetly limits on status reports to 100K for status reports and 100K
+for samples. Previous values were 10M. Most full sessions from the busiest
+systems are < 50K total.
+
+Recoded sendDataTimeout() to break uploads into 512 byte chunks and insert
+delays only when a chunk is fragmented. This methodology improves reliability
+on Win* systems without any significant penalty on systems that don't need
+socket sends() to be in smaller chunks.
+
+Fixed TCPClient::transmit() and TCPHost::transmit() bug where returned byte
+count might be -1. Now returned byte counts can only be 0 or more.
+
+20080403 - Version SNF2-9vr5.15.5
+
+Minor modifications to networking module to better support non-blocking open()
+
+Updated SNFClient with new timing and non-blocking open(). Worst case return
+time from SNFClient estimated at 200 seconds (theoretically impossible). No-
+connection return time from SNFClient estimated at 20 seconds.
+
+20080326 - Version SNF2-9rc4.15.4
+
+Refactored snfNETmgr::sync() to consolidate non-blocking io routines.
+
+Added detailed thread status data to XCI listener thread.
+
+Refactored snfNETmgr::sync() to check a Timeout, removed TCPWatchdog.
+
+20080325 - Version SNF2-9rc4.12.4
+
+Added a "Rulebase Getter" feature as part of the snf_Reloader. When enabled
+the Rulebase Getter will launch a user defineable system() call whenever a
+new rulebase file is available. The call will be repeated until the condition
+is cleared by a successful update of the rulebase file. The Rulebase Getter
+will wait a configurable "guard time" between attempts. The default system()
+call is "getRulebase" with a guard time of 3 minutes. In most cases this will
+launch the provided getRulebase script which should be present in the start
+location of SNFServer on most systems. Best practice is to configure the full
+path to the update script. The system() call is made in a separate thread so
+that if the system() call hangs for some reason only the Rulebase Getter is
+stuck.
+
+Improved exception handling/reporting in scanMessageFile().
+
+Updated scanMessagFile() header injection code to accommodate messages with
+no body. Previous version would throw an exception when it could not find an
+injection point. The new version makes the injection point byte 0 and puts
+the injected headers at the top of the message using it's best guess about the
+type of line endings (CRLF or LF) to use.
+
+Updated Networking library to use SO_REUSEADDR by default on listeners.
+
+20080319 - Version SNF2-9rc4.11 
+
+Added IPScan on-off to snfmdplugin.xml. This allows users to turn off the
+IPScan feature without editing the Plugins.dat file as was previously
+required. The feature can now be enabled or disabled at will by editing the
+configuration file.
+
+Added Configuration editor options to snfmdplugin.xml. Previously the built-
+in configuration function was hard coded to start notepad with the config
+file. Now the system() call made by the ConfigFunc() can be edited in the
+configuration file. The configuration file name can be appended to the
+command optionally. The default is still to start notepad and append the
+configuration file path so that it is loaded automatically. It is hoped that
+GUI based configuration editors for the SNF plugin will be built by third
+parties and in the mean time folks can now configure their favorite XML file
+editor to modify their SNF plugin configuration.
+
+Modified API use fixed shutdown bug - The plugin used to initialize the SNF
+scanning engine when the DLL was loaded and would shut it down when the DLL
+was unloaded. Now the Startup and Shutdown functions in the MDaemon plugin
+API. This ensures that the engine components are started and shutdown in the
+proper sequence. 
+
+Included new SNFEngine core (excerpts from that change log included).
+
+20080318 - SNF2-9rc1.11.exe Consolidated several mods/fixes
+
+Corrected scan error logging bug. Was posting <s/> now posts <e/>.
+
+Updated scan error logging to be more uniform with non-scan errors.
+
+Developed various script prototypes for postfix integration & automated
+updates on win* systems using the new UpdateReady.txt file mechanism.
+
+Fixed a bug in scanMessageFile() where an \n\n style insertion point
+would never be detected.
+
+Modified scanMessageFile() header injection to strip <CR> from line ends
+when the message file provided does not use them. The line-end style of
+the message file is detected while locating the insertion point. If the
+insertion point (first blank line) does not use <CR><LF> then the SNF
+generated X-Headers are stripped of <CR> in a tight loop before injection.
+
+Enhanced error and exception reporting in SNFMulti.cpp scanMessageFile().
+
+Enhanced exception handling in networking module. All exceptions now
+throw descriptive runtime_error exceptions.
+
+20080306 - SNF2-9rc1.8.exe (FIRST RELEASE CANDIDATE for VERSION 3!)
+
+Added Drilldown Header Directive Functions - When the candidate source IP
+comes from a header matching a drilldown directive the IP is marked "Ignore"
+in GBUdb and the candidate is no longer eligible to be the source for that
+message. This allows SNF to follow the trusted chain of devices (by IP) down
+to the actual source of the message. It is handy for ignoring net blocks
+because it can match partial IPs but it is designed to allow SNF to learn
+it's way through the servers at large ISPs so that the original source for
+each message can be evaluated directly.
+
+Added Source Header Directive Functions - This feature allows SNF to acquire
+the source IP for a message from a specific header rather than searching
+through the Received headers in the message. This is useful when the original
+source for a message is not represented in Received headers. For example:
+Hotmail places the originating source IP in a special header and does not
+provide a Received header for that IP. This feature is protected from abuse
+by a "Context" feature which only activates the source header directive when
+specific content is found in a specific received header. Using the above
+example, this feature can be configured so that a Hotmail source header would
+only be read if the top Recieved header contained "hotmail.com [" indicating
+that the ptr lookup for the header matched the hotmail domain. Note: When a
+source is pulled from a header directive that source is put into a synthetic
+Received header and injected into the scanning stream (not the message) as
+the first Received header.
+
+Added forced source IP to XCI - It is now possible to "inject" or "force"
+the source IP for any message by providing that IP in the XCI request or
+directly in a scan...() function call. This allows the calling application
+to provide the source IP for a message ahead of any Received headers that
+might be in the message. This is useful when the calling application knows
+the original source IP for the message but that IP is not represented in
+the Received headers and it is not desireable to use the Source Header
+Directive mechanism.
+
+Added forced source IP mode to SNFClient - It is now possible to call the
+SNFClient utility with an IP4Address using the syntax:
+
+SNFClient -source=12.34.56.78
+
+The -source mode of SNFClient exercises the forced source IP feature in
+the XCI (see above)
+
+Added Status Report features to SNFClient and XCI - It is now possible to
+request the latest status.second, status.minute, or status.hour data via
+the XCI and SNFClient. The syntax for requesting a status report using the
+SNFClient is:
+
+SNFClient -status.second
+SNFClient -status.minute
+SNFClient -status.hour
+
+In addition to providing status reports the SNFClient in this mode will
+return a nonzero value (usually 99) if it is unable to get a status report
+from SNFServer. This feature can be used to verify that SNFServer is up
+and responding. If SNFServer is OK then the result code returned is 0.
+
+Added result codes to SNFClient -test and XCI IP test functions - The XCI
+engine has been upgraded to provide the range value for the IP under test
+as well as the symbolic result code associated with that range. This allows
+the -test function to provide results that are consistent with the GBUdb
+configuration without additional processing: For example, if the IP falls
+in the Caution range then the Caution result code will be returned just
+as if a message had been scanned with the same IP and no pattern match
+occurred. The same is true for Truncate and Black range hits.
+
+Added Timestamp and Command Line Parameter data to SNFClient.exe.err - When
+an error occurs with SNFClient that may not appear in the SNFServer logs an
+entry is appended to the SNFClient.exe.err file. That in itself is not new.
+The new feature is that the entries added to the SNFClient.exe.err file now
+include timestamp and command line data to aid in debugging.
+
+Updated the Configuration Log to include all of the current configuration
+features and to improve it's readability.
+
+20080207 - SNF2-9b1.7.exe
+
+SYNC Timeout now 2x SYNC Schedule
+
+SNFServer now produces an UpdateReady.txt file when the UTC timestamp on
+the SYNC server is newer than the UTC timestamp of the active rulebase. It
+is presumed that a suitable update script or program will run periodically
+and download a fresh rulebase file if the UpdateReady.txt file is present.
+The update script should remove the UpdateReady.txt file when it completes
+a successful download of the new rulebase file.
+
+Added available rulebase UTC in status reports <udate utc.../>
+
+Added Automatic path fixup for ending / or \
+
+Added option to use local time in log rotation <rotation localtime='no'/>
+The default is still utc.
+
+20071102 - SNF2-9b1.6.exe
+
+Increased MAX_EVALS from 1024 to 2048.
+
+Adjusted defult range envelopes in snf_engine.xml to be more conservative.
+
+
+20071017 - Version SNF2-9b1.5
+
+Added a missing #include directive to the networking.hpp file. The
+missing #include was not a factor on Linux and Windows systems but
+caused compiler errors on BSD systems.
+
+Corrected a bug in the GBUdb White Range code where any message with a
+white range source IP was being forced to the white result code. The
+engine now (correctly) only forces the result and records the event when
+a black pattern rule was matched and the White Range IP causes that
+scan result to be overturned. If the scan result was not a black pattern
+match then the original scan result is allowed to pass through.
+
+Corrected a bug in the Header Analysis filter chain module that would
+cause the first header in the message to be ignored in some cases.
+
+Corrected an XML log format problem so that <s/> elements are correctly
+open ended <s ....> or closed (empty) <s..../> according to whether they
+have subordinate elements.
+
+Adjusted the GBUdb header info format. The order of the Confidence
+figure and Probabilty figure is now the same as in the XML log files
+(C then P). The confidence and probability figures are now preceeded
+with c= and p= respectively so that it's easy to tell which is which.
+
+20071009 Version 2-9b1.4
+
+Tightened up the XCI handler code and removed the watchdog. The watchdog
+would restart the listener if there were no connections in 5 minutes. It
+was originally added to provide additional stability, however in practice
+there have been no "stalled listeners". Also, a stalled listener would
+likely be a sign of a different problem that the watchdog would tend to
+hide.
+
+Modified and refactored the XCI configuration management code. All XCI config
+changes and up-down operations are now handled in a single function except
+upon exit from the main XCI thread where XCI_shutdown() is always called.
+
+Added some more detailed exception handling code to the XCI component so that
+more data will be logged in the event of an error.
+
+Reviewed and modified the InstallInstructions.txt file. Removed this log
+to this separate file.
+
+Modified the snfmdplugin.xml file to properly configure the new features in
+the engine.
+
+* Header training directives and new <training/> section.
+
+* XCI interface configuration.
+
+* Tweaks to GBUdb ranges.
+
+* msg-file type configuration (not used in MDaemon, but configured anyway)
+
+----
+
+Version 2-9a11 (engine a53)
+
+* Enhanced IP extraction from Received headers so that any unexpected bytes
+  between the [ and ] will force the attempt to be aborted.
+
+* Fix the IP test code so that the IP 0.0.0.0 cannot be the source IP and
+  cannot be tested.
+
+Version 2-9a11 (engine a52)
+
+* Corrected plug-in log entry logic. Allowed/Rejected tag now comes directly
+  from the message rejection logic and is accurate in all cases.
+
+Version 2-9a10 (engine a52)
+
+* Corrected a bug in the MessageIPFunc where Ignore flagged IPs would still
+  cause rejected messages if the statistics were in the Truncate range. Now
+  messages are rejected in only two cases:
+
+  The Flag is _Ugly_ and the rating is _Truncate_ or, the Flag is _Bad_.
+
+Version 2-9a9 (engine a52)
+
+* Adjusted IPtest module in HeaderAnalysis to handle TooManyIPs exception
+  locally and silently.
+
+* Increased HeaderAnalysis IP limit from 20 to 50.
+
+Version 2-9a9 (engine a51)
+
+* Corrected possible heap corruption bug in EvaulationMatrix Destructors.
+
+* Added trace strings to scanMessage() for tighter panic reporting.
+
+* Added caching to snf_engine Evaluator allocation scheme.
+
+* Added optimizations to snf_engine Evaluator safety checks.
+
+Version 2-9a8
+
+* Added deep exception handling to Token Matrix objects.
+
+Version 2-9a7
+
+* Exception handling throughout the engine has been refactored to use std:exception
+  and to provide additional detail via e.what()
+
+* The plug-in log will now show e.what() data as SNF Debug: whenever an exception
+  is thrown during a message scan.
+
+Version 2-9a6
+
+* Adjusted .ctl file path converter to accept either .msg or .tmp paths.
+
+Version 2-9a5
+
+A lot of new things were learned, updated, and corrected.
+
+* Fixed the "lockup" when the plugin failed to start successfully. The cause of this
+  appears to be a threading issue associated with DLLs that are being initialized.
+  If threads are created during the initialization of a DLL, the DLL must succeed!
+  The threads that are created do not get any cycles until after the DLL is loaded
+  successfully. As a result, if the initialization process attempts to join() these
+  threads a deadlock is created. The fix was to allow the SNF plugin initialization
+  process to succeed in all cases while setting a flag that forces the engine to
+  be inert if the initialization was not successful. When the DLL is later unloaded
+  the threads are already running so the join() calls that are part of the engine
+  cleanup code are able to complete without incident.
+
+* Installed detailed exception handling for the start-up sequence. The plugin can
+  now report on very specific reasons for failing to initialize properly.
+
+* Fixed a bug in the GBUdbIgnoreList processor where long lines would cause the
+  remainder of the file not to be read. The line length limit still exists, but
+  it is now 255 characters which is unlikely to occur and would be considered
+  incorrect formatting.
+
+* The threading library now includes top-level exception handling to trap any
+  exception that was not handled by myTask(). Along with this two flags were
+  added to thread objects: isRunning() and isBad(). isRunning() is true when a
+  thread object is still active. isBad() is true if the thread failed to start or
+  an exception escaped myTask().
+
+* At least one GBUdbIgnoreList entry is now REQUIRED. If the count of IPs from the
+  GBUdbIgnoreList.txt file is less than 1 (or the file is missing) then the plug-in
+  will complain and fail to start.
+
+* snf2check.exe has been removed from the distribution for the time being since it
+  causes some systems to strip the attachment or block the email. This is the same
+  program that is already on existing SNF systems.

Distribution_20090514/GBUdbIgnoreList.txt

@@ -0,0 +1,10 @@
+# List of IPs to Ignore on startup
+# Each IP in this list is set to Ignore in GBUdb when
+# The configuration is loaded.
+# Hash mark on the beginning of a line indicates a comment.
+# Comments after an IP are also ignored.
+# One line per IP. Sorry, no CIDR yet.
+# Be sure to list ALL of your gateways :-)
+
+127.0.0.1	# ignore localhost, of course.
+

Distribution_20090514/InstallInstructions.txt

@@ -0,0 +1,146 @@
+MDaemon Plugin V2.9rc* (V3) installation instructions
+------------------------------------------------------------------------------
+
+1. Locate your \MDaemon directory (Usually c:\MDaemon)
+
+2. Create the directory \MDaemon\SNF
+
+3. Copy the distribution files to \MDaemon\SNF
+
+4. Edit identity.xml in notepad.
+4.1. Replace licensid with your SNF license ID.
+4.2. Replace authenticationxx with your SNF authentication code.
+
+5. Adjust/Create your Plugins.dat file (\MDaemon\App\Plugins.dat)
+
+5.1. If you already have a Plugins.dat file
+5.1.1. Copy the contents of the Plugins.dat file in the distribution
+       to the Plugins.dat file you have.
+5.1.2. If you have a [Message Sniffer] section in your Plugins.dat
+       file then make a copy of it (for backup) then remove that
+       section. (This will disable your previous Message Sniffer
+       installation)
+
+5.2. If you do not already have a Plugins.dat file
+5.2.1. Copy the Plugins.dat file from the distribution to your
+       \MDaemon\App directory.
+
+6. Copy the snf-groups.cf into \MDaemon\SpamAssassin\rules
+
+7. Download your SNF rulebase file and place it in your SNF directory.
+7.1. Once you've signed up for a 30 Day free Trial or purchased a license for
+     SNF you will receive update notifications via email. These notifications
+     contain instructions on how to download your rulebase file. You can get
+     your 30 Day Free Trial started by visiting www.armresearch.com.
+7.2. We have included an update script and utilities that you can use to
+     automate updates to your rulebase file. The SNFServer engine that runs
+     inside the plugin will produce an UpdateReady.txt file any time the local
+     rulbase file is older than the latest available update. The included
+     getRulebase.cmd script checks for this file and uses the open source
+     wget and gzip utilities to download, validate, and replace your rulebase
+     file automatically.
+7.2.1. Edit the top of the getRulebase.cmd file to establish the correct
+       working directory, authentication string, and license ID for your
+       rulebase files.
+7.2.2. Verify that the <update-script/> section of your snfmdplugin.xml file
+       points to the correct location of the getRulebase.cmd script. This new
+       feature will automatically run the getRulebase.cmd script whenever a
+       newer rulebase file is available on our servers.
+
+8. Edit the GBUdbIgnoreList.txt file in notepad.
+8.1 Add the IP of any gateways you have as well as any systems you
+    have that send mail through your mail server.
+8.2 It is very important to populate your GBUdbIgnoreList if you have
+    gateways ahead of your mail server or else GBUdb will learn that
+    those systems are responsible for sending spam! The GBUdb engine
+    uses the ignore list to determine the actual source IP of the message.
+    The first IP it sees in the headers that is not on the ignore list
+    is determined to be the source IP for the message. Since most email
+    "in the wild" these days are spam, any gateways that are not listed
+    will be seen to be sending mostly spam - in error, of course.
+8.3 You cannot enter network blocks in the GBUdbIgnoreList.txt file. If
+    you wish to ignore (mark as infrastructure) blocks of IPs then you should
+    use the <drilldown/> section of the snfmdplugin.xml file to enter
+    patterns that match the network blocks you want to ignore. For example,
+    if you want to ignore servers in the 12.34.56.0/24 network block then
+    you would enter a drilldown rule like:
+
+    <drilldown>
+        ...
+        <received ordinal='0' find='[12.34.56.'/>
+
+    The rule tells GBUdb to learn to ignore any IP in the top (ordinal 0)
+    received header if that header contains the string '[12.34.56.'. Of
+    course that string will match every IP in the 12.34.56.0/24 class C
+    block so any servers in that block which deliver mail to the SNF equiped
+    server will be learned as infrastructure (ignore flag set).
+
+9. Review and adjust your snfmdplugin.xml file
+9.1. Check the paths at the top of the file and make sure they are complete and
+     correct. In most cases the defaults will work, but if you've installed
+     MDaemon & SNF on a different drive or in a different directory it would
+     be best to update these paths:
+9.1.1. Find/Check <snf><node identity.../>
+9.1.2. Find/Check <snf><node><paths><log path.../>
+9.1.3. Find/Check <snf><node><paths><rulebase path.../>
+9.1.4. Find/Check <snf><node><paths><workspace path.../>
+9.2. If you have any addresses where people legitimately send spam such as an
+     abuse reporting address or support address then you should enter that
+     address into the <snf><node><gbudb><training><bypass/> section of the
+     snfmdplugin.xml file. For example an abuse reporting address might look
+     like this:
+
+     <bypass>
+         ...
+         <header name='To:' find='spam@example.com'/>
+
+     The rule tells GBUdb to bypass it's training mechanism if it finds a
+     'To:' header in a message that contains 'spam@example.com'. This should
+     prevent customer's IPs from being learned as spam sources when they send
+     messages to spam@example.com.
+
+9.3. Your system practices and policies may require additional rules in order
+     to get the best performance from the GBUdb system. For more information
+     please check out www.armresearch.com, support@armresearch.com, and our
+     community list sniffer@sortmonster.com.
+
+10. Restart MDaemon.
+
+11. Verify the SNF plugin is installed
+11.1. In the plug-ins log tab you should see:
+      Attempting to load 'SNF' plugin
+      *  ConfigFunc: ConfigFunc@4 (Ok, ready to use)
+      *  StartupFunc: Startup@4 (Ok, ready to use)
+      *  ShutdownFunc: Shutdown@4 (Ok, ready to use)
+      *  PreMessageFunc:  (NULL)
+      *  PostMessageFunc: MessageFunc@8 (Ok, ready to use)
+      *  SMTPMessageFunc: MessageIPFunc@8 (Ok, ready to use)
+      *  SMTPMessageFunc2:  (NULL)
+      *  SMTPMessageFunc3:  (NULL)
+      *  DomainPOPMessageFunc:  (NULL)
+      *  MultiPOPMessageFunc:  (NULL)
+      *  Result: success (plugin DLL loaded in slot 0)
+      ----------
+      SNF plugin is starting up
+      SNFMulti Engine Version 2.9rc11 Build: Mar 20 2008 15:18:30
+      SNF MDaemon Plugin Version 2-9rc4 Build: Mar 20 2008 15:17:20
+      SNF Config: C:\MDaemon\SNF\SNFMDPlugin.xml
+      ----------
+
+      Note that the slot may be different if you have other plugins.
+
+11.2. When your system processes a message you should see something like:
+
+      SNF MessageScan: c:\mdaemon\queues\local\md50000000039.msg, Result=0
+
+      If you have a valid AntiVirus for MDaemon license you should also see
+      a line similar to this:
+
+      SNF IPScan: C:\MDaemon\Queues\Inbound\md50000000029.msg, 192.168.0.102, {Ugly, p=-1, c=0.303425,  Normal} Allowed.
+
+11.3. In your messages you should see some new headers similar to:
+
+      X-MessageSniffer-GBUdb-Result: 0, 192.168.0.102, Ugly -1 0.303425 Source Normal
+      X-MessageSniffer-Scan-Result: 0
+      X-MessageSniffer-Patterns:
+	0-0-0-998-c

Distribution_20090514/Plugins.dat

@@ -0,0 +1,11 @@
+[SNF]
+MenuText=Configure SNF Plug-in
+Enable=Yes
+DllPath=c:\MDaemon\SNF\snfmdplugin.dll
+StartupFuncName=Startup@4
+ConfigFuncName=ConfigFunc@4
+PostMessageFuncName=MessageFunc@8
+SMTPMessageFuncName=MessageIPFunc@8
+ShutdownFuncName=Shutdown@4
+PluginDoesAllLogging=No
+NonAuthOnly=Yes

Distribution_20090514/SNFClient_readme.txt

@@ -0,0 +1,182 @@
+SNFClient Readme
+
+Command line client for SNF. This utility formats and processes SNF_XCI
+requests through the SNF Engine working on the local machine. In general
+this utility can be used as a replacement for the earlier SNF command
+line scanner. It is also useful for other uses such as debugging and
+communicating with GBUdb.
+
+Note: Unlike prior versions of SNF, this command line utility does not
+need to be "branded" (renamed for the SNF license id).
+
+_________
+Help Mode
+
+SNFClient.exe
+
+  When called with no command line parameters the utility produces
+  help and version information.
+
+__________
+Debug Mode
+
+SNFDebugClient.exe
+
+  When "debug" or "Debug" appears in the path to the program name
+  or if the program's name is altered to include the word "debug" or
+  "Debug" then the program will produce additional information about
+  it's operation to aid in debugging problems. This includes the
+  entire raw SNF_XCI request and response.
+
+__________________
+Message Scan Modes
+
+  These modes are used to scan email message files (the data part of
+  smtp). This utility can be used as a drop-in replacement for previous
+  verions of SNF (Message Sniffer) for scanning messages. However, this
+  new version does not need to be "branded" (renamed for the license id)
+  and will ignore the authentication string if it is provided. Also,
+  since the newer version of SNF uses a client-server model and not a
+  peer-server model, there is no need for a "persistent" mode.
+
+  If "persistent" is passed to this utility on the command line as it
+  would be used in prior versions of SNF then it will be treated like
+  a file name and the scan will normally fail since a file named
+  "persistent" is not likely to exist.
+
+SNFClient.exe <FileNameToScan>
+
+  Scan Mode: Scans <FileNameToScan> and returns a result code.
+
+SNFClient.exe <authenticationxx> <FileNameToScan>
+
+  Compatibility Mode: Ignores <authenticationxx> then scans the
+  <FileNameToScan> and returns a result code. This mode provides
+  drop-in compatibility with previous versions of SNF.
+
+SNFClient.exe -xhdr <FileNameToScan>
+
+  XHeader Mode: Scans <FileNameToScan> and returns the result. Also
+  outputs the contents of the X-Headers created by the SNF engine. If
+  the SNF engine is configured to inject these headers then they will
+  also have been injected into the <FileNameToScan>.
+
+  The SNF Engine can be configured to provide the X-Headers only to
+  the API without injecting them. In this case the XHeader Mode will
+  display the X-Headers that would be injected, but they will not
+  have been injected into the <FileNameToScan>.
+
+  If the SNF Engine is configured not to produce X-Headers (none) then
+  the XHeader Mode will not produce X-Headers because they will not
+  have been generated by the engine.
+
+  (note: -xhdr and -source options can be combined)
+
+
+SNFClient.exe -source=<IP4Address> <FileNameToScan>
+
+  Source-IP Mode: Scans <FileNameToScan> and returns the result. The
+  provided source IP is injected into the scan as the first Received
+  header so that the scanning engine will presume the IP is the source
+  of the message. This allows you to pre-define the source IP for the
+  message when there is no other received header or when the received
+  headers may be incorrect or may not present the actual source of
+  the message.
+
+  (note: -xhdr and -source options can be combined)
+
+_____________________________
+SNFServer Status Report Modes
+
+SNFClient.exe -status.second
+SNFClient.exe -status.minute
+SNFClient.exe -status.hour
+
+  This mode returns the latest posted status report as indicated.
+  Normally these status reports are also posted to files in the
+  SNFServer workspace.
+
+  In this mode the SNFClient will return a result code (error level)
+  of 0 when the request is successful and 99 (or some nonzero value)
+  when the request is not successful. This allows the SNFClient to
+  be used to verify that the SNFServer is running.
+
+  Note: In most other modes the SNFClient returns a fail-safe 0
+  result code to avoid tagging messages as spam when there are errors.
+
+________________________
+XCI Server Command Modes 
+
+These features will expand as needed in later versions.
+
+SNFClient.exe -shutdown
+
+  If the SNF Engine is running in an application that accepts SNF_XCI
+  server commands then this mode will send that command. The shutdown
+  command may have no effect if the application does not use the SNF_XCI
+  server commnand interface or does not recognize the command.
+
+___________
+GBUdb Modes
+
+  These modes are used to communicate with the GBUdb system on the
+  local node. It is possible to test (read out) an IP record or make
+  any of a number of changes to IP data in the GBUdb.
+
+SNFClient.exe -test <IP4Address>
+
+  Returns the current GBUdb statistics for the <IP4Address>
+
+  SNFClient also returns a result code that matches the GBUdb range
+  for the tested IP. These ranges are defined in the SNFServer
+  configuration file. By default they are:
+
+  20 - Truncate
+  63 - Black
+  40 - Caution
+   0 - Normal
+
+SNFClient.exe -set <IP4Address> <flag> <bad> <good>
+
+  Creates or updates the data for <IP4Address> as provided. The
+  <IP4Address> must be provided as well as at least one of
+  <flag>, <bad>, and <good>. If <flag>, <bad>, or <good> are
+  to be left unchanged then they should be entered as a dash "-".
+
+  Examples:
+
+  Set all data for an IP. The flag will be "ugly", the bad count
+  will be 0 and the good count will be 1000.
+
+  SNFClient.exe -set 12.34.56.78 Ugly 0 1000
+
+  Set the flag to "ignore" and do not change the counts.
+
+  SNFClient.exe -set 12.34.56.78 ignore - -
+
+  Set the good count to 400 and do not change anything else.
+
+  SNFClient.exe -set 12.34.56.78 - - 400
+
+SNFClient.exe -good <IP4Address>
+
+  Creates or updates statistics for the <IP4Address>. Increases the
+  good count by one. (Record a good event)
+
+SNFClient.exe -bad <IP4Address>
+
+  Creates or updates statistics for the <IP4Address>. Increases the
+  bad count by one. (Record a bad event)
+
+SNFClient.exe -drop <IP4Address>
+
+  Removes all local data for the <IP4Address>. Anything the local
+  system "knows" about the IP is forgotten. Next time the IP is
+  encountered it will be treated as new.
+
+____________________
+For More Information
+
+See www.armresearch.com
+Copyright (C) 2007-2008 Arm Research Labs, LLC.
+

Distribution_20090514/getRulebase.cmd

@@ -0,0 +1,47 @@
+@ECHO OFF
+SETLOCAL 
+
+
+REM ----- Edit This Section --------
+
+SET SNIFFER_PATH=\mdaemon\snf
+SET AUTHENTICATION=authenticationxx
+SET LICENSE_ID=licensid
+
+REM --------------------------------
+
+CD /d %SNIFFER_PATH%
+
+if not exist UpdateReady.txt GOTO DONE
+
+if exist UpdateReady.lck GOTO DONE
+
+:DOWNLOAD
+ 
+COPY UpdateReady.txt UpdateReady.lck
+wget http://www.sortmonster.net/Sniffer/Updates/%LICENSE_ID%.snf -O %LICENSE_ID%.new.gz --header=Accept-Encoding:gzip --http-user=sniffer --http-passwd=ki11sp8m
+
+if exist %LICENSE_ID%.new.gz gzip -d -f %LICENSE_ID%.new.gz
+
+snf2check.exe %LICENSE_ID%.new %AUTHENTICATION%
+
+if errorlevel 1 goto CLEANUP
+
+if exist %LICENSE_ID%.old del %LICENSE_ID%.old
+
+rename %LICENSE_ID%.snf %LICENSE_ID%.old
+rename %LICENSE_ID%.new %LICENSE_ID%.snf
+
+if exist UpdateReady.txt del UpdateReady.txt
+if exist UpdateReady.lck del UpdateReady.lck
+
+:CLEANUP
+
+if exist %LICENSE_ID%.new del %LICENSE_ID%.new
+if exist UpdateReady.lck del UpdateReady.lck 
+
+:DONE
+
+ENDLOCAL
+
+

Distribution_20090514/identity.xml

@@ -0,0 +1 @@
+<snf><identity licenseid='licensid' authentication='authenticationxx'/></snf>

Distribution_20090514/snf-groups.cf

@@ -0,0 +1,80 @@
+## Basic rules for detecting Message Sniffer header emissions
+## so that they can be given scores in subsequent SpamAssassin
+## scanning. Modify the scores and headers as needed for your
+## system.
+
+score    SNF_IPTRUNCATE     10
+describe SNF_IPTRUNCATE     IP Source consistently sends spam
+header   SNF_IPTRUNCATE     X-MessageSniffer-Scan-Result =~ /20/
+
+score    SNF_IPCAUTION      3
+describe SNF_IPCAUTION      New IP source mixed scan results
+header   SNF_IPCAUTION      X-MessageSniffer-Scan-Result =~ /40/
+
+score    SNF_IPBLACK        4
+describe SNF_IPBLACK        Static IP rules and GBUdb Black
+header   SNF_IPBLACK        X-MessageSniffer-Scan-Result =~ /63/
+
+score    SNF_OBFUSCATION    5
+describe SNF_OBFUSCATION    Obfuscation detection
+header   SNF_OBFUSCATION    X-MessageSniffer-Scan-Result =~ /62/
+
+score    SNF_ABSTRACT       5
+describe SNF_ABSTRACT       Abstracted spam patterns
+header   SNF_ABSTRACT       X-MessageSniffer-Scan-Result =~ /61/
+
+score    SNF_GENERAL        5
+describe SNF_GENERAL        General spam content - unclassified
+header   SNF_GENERAL        X-MessageSniffer-Scan-Result =~ /60/
+
+score    SNF_GAMBLE         5
+describe SNF_GAMBLE         Gambling and Casino spam patterns
+header   SNF_GAMBLE         X-MessageSniffer-Scan-Result =~ /59/
+
+score    SNF_DEBT           5
+describe SNF_DEBT           Debt and Credit offer spam patterns
+header   SNF_DEBT           X-MessageSniffer-Scan-Result =~ /58/
+
+score    SNF_GETRICH        5
+describe SNF_GETRICH        Home Biz, Stock Push, get rich quick
+header   SNF_GETRICH        X-MessageSniffer-Scan-Result =~ /57/
+
+score    SNF_TONER          5
+describe SNF_TONER          Ink and Toner offer spam patterns
+header   SNF_TONER          X-MessageSniffer-Scan-Result =~ /56/
+
+score    SNF_MALWARE        5
+describe SNF_MALWARE        Virus, worm, and exploit patterns
+header   SNF_MALWARE        X-MessageSniffer-Scan-Result =~ /55/
+
+score    SNF_ADULT          5
+describe SNF_ADULT          Porn and Adult spam patterns
+header   SNF_ADULT          X-MessageSniffer-Scan-Result =~ /54/
+
+score    SNF_SCAM           5
+describe SNF_SCAM           Phishing, 419, and other scam patterns
+header   SNF_SCAM           X-MessageSniffer-Scan-Result =~ /53/
+
+score    SNF_SNAKEOIL       5
+describe SNF_SNAKEOIL       Drugs, diet aids, health scams
+header   SNF_SNAKEOIL       X-MessageSniffer-Scan-Result =~ /52/
+
+score    SNF_SPAMWARE       5
+describe SNF_SPAMWARE       Spamming tools and spam hosting offers
+header   SNF_SPAMWARE       X-MessageSniffer-Scan-Result =~ /51/
+
+score    SNF_DATATHEFT      5
+describe SNF_DATATHEFT      Movies, software, unlimited downloads
+header   SNF_DATATHEFT      X-MessageSniffer-Scan-Result =~ /50/
+
+score    SNF_AVPUSH         5
+describe SNF_AVPUSH         Antivirus software push
+header   SNF_AVPUSH         X-MessageSniffer-Scan-Result =~ /49/
+
+score    SNF_INSURANCE      5
+describe SNF_INSURANCE      Insurance offer patterns
+header   SNF_INSURANCE      X-MessageSniffer-Scan-Result =~ /48/
+
+score    SNF_TRAVEL         5
+describe SNF_TRAVEL         Travel offer patterns
+header   SNF_TRAVEL         X-MessageSniffer-Scan-Result =~ /47/

Distribution_20090514/snfmdplugin.xml

@@ -0,0 +1,156 @@
+<!-- SNFMulti V3.0 Configuration File, Setup: Typical of MDaemon Plugin -->
+<!-- http://www.armresearch.com/support/articles/software/snfServer/config/snfEngine.jsp -->
+
+<snf>
+    <node identity='/MDaemon/SNF/identity.xml'>
+
+        <paths>
+            <log path='/MDaemon/SNF/'/>
+            <rulebase path='/MDaemon/SNF/'/>
+            <workspace path='/MDaemon/SNF/'/>
+        </paths>
+
+        <logs>
+
+            <rotation localtime='no'/>
+
+            <status>
+                <second log='yes' append='no'/>
+                <minute log='yes' append='no'/>
+                <hour log='no' append='no'/>
+            </status>
+
+            <scan>
+                <identifier force-message-id='no'/>
+                <classic mode='none' rotate='no' matches='none'/>
+                <xml mode='file' rotate='yes' matches='all' performance='yes' gbudb='yes'/>
+
+                <xheaders>
+                    <output mode='inject'/>
+
+                    <version on-off='off'>X-MessageSniffer-Version</version>
+                    <license on-off='off'>X-MessageSniffer-License</license>
+                    <rulebase on-off='off'>X-MessageSniffer-RulebaseUTC</rulebase>
+                    <identifier  on-off='off'>X-MessageSniffer-Identifier</identifier>
+                    <gbudb on-off='on'>X-MessageSniffer-GBUdb-Result</gbudb>
+                    <result on-off='on'>X-MessageSniffer-Scan-Result</result>
+                    <matches on-off='on'>X-MessageSniffer-Patterns</matches>
+
+                    <black on-off='off'>X-MessageSniffer-Spam: Yes</black>
+                    <white on-off='off'>X-MessageSniffer-White: Yes</white>
+                    <clean on-off='off'>X-MessageSniffer-Clean: Yes</clean>
+                    <symbol on-off='off' n='0'>X-MessageSniffer-SNF-Group: OK</symbol>
+                    <symbol on-off='off' n='20'>X-MessageSniffer-SNF-Group: Truncated</symbol>
+                    <symbol on-off='off' n='40'>X-MessageSniffer-SNF-Group: Caution</symbol>
+                    <symbol on-off='off' n='63'>X-MessageSniffer-SNF-Group: Black</symbol>
+                    <symbol on-off='off' n='62'>X-MessageSniffer-SNF-Group: Obfuscation</symbol>
+                    <symbol on-off='off' n='61'>X-MessageSniffer-SNF-Group: Abstract</symbol>
+                    <symbol on-off='off' n='60'>X-MessageSniffer-SNF-Group: General</symbol>
+                    <symbol on-off='off' n='59'>X-MessageSniffer-SNF-Group: Casinos-Gambling</symbol>
+                    <symbol on-off='off' n='58'>X-MessageSniffer-SNF-Group: Debt-Credit</symbol>
+                    <symbol on-off='off' n='57'>X-MessageSniffer-SNF-Group: Get-Rich</symbol>
+                    <symbol on-off='off' n='56'>X-MessageSniffer-SNF-Group: Ink-Toner</symbol>
+                    <symbol on-off='off' n='55'>X-MessageSniffer-SNF-Group: Malware</symbol>
+                    <symbol on-off='off' n='54'>X-MessageSniffer-SNF-Group: Porn-Dating-Adult</symbol>
+                    <symbol on-off='off' n='53'>X-MessageSniffer-SNF-Group: Scam-Phishing</symbol>
+                    <symbol on-off='off' n='52'>X-MessageSniffer-SNF-Group: Snake-Oil</symbol>
+                    <symbol on-off='off' n='51'>X-MessageSniffer-SNF-Group: Spamware</symbol>
+                    <symbol on-off='off' n='50'>X-MessageSniffer-SNF-Group: Media-Theft</symbol>
+                    <symbol on-off='off' n='49'>X-MessageSniffer-SNF-Group: AV-Push</symbol>
+                    <symbol on-off='off' n='48'>X-MessageSniffer-SNF-Group: Insurance</symbol>
+                    <symbol on-off='off' n='47'>X-MessageSniffer-SNF-Group: Travel</symbol>
+
+                </xheaders>
+            </scan>
+        </logs>
+
+        <network>
+            <sync secs='30' host='sync.messagesniffer.net' port='25'/>
+            <update-script on-off='on' call='/MDaemon/SNF/getRulebase.cmd' guard-time='180'/>
+        </network>
+
+        <xci on-off='on' port='9001'/>
+
+        <gbudb>
+            <database>
+
+                <condense minimum-seconds-between='600'>
+                    <time-trigger on-off='on' seconds='86400'/>
+                    <posts-trigger on-off='off' posts='1200000'/>
+                    <records-trigger on-off='off' records='600000'/>
+                    <size-trigger on-off='on' megabytes='150'/>
+                </condense>
+
+                <checkpoint on-off='on' secs='3600'/>
+
+            </database>
+
+            <regions>
+
+                <white on-off='on' symbol='0'>
+                    <edge probability='-1.0' confidence='0.4'/>
+                    <edge probability='-0.8' confidence='1.0'/>
+                    <panic on-off='on' rule-range='1000'/>
+                </white>
+
+                <caution on-off='on' symbol='40'>
+                    <edge probability='0.4' confidence='0.0'/>
+                    <edge probability='0.8' confidence='0.5'/>
+                </caution>
+
+                <black on-off='on' symbol='63'>
+                    <edge probability='0.8' confidence='0.2'/>
+                    <edge probability='0.8' confidence='1.0'/>
+                    <truncate on-off='on' probability='0.9' peek-one-in='5' symbol='20'/>
+                    <sample on-off='on' probability='0.8' grab-one-in='5' passthrough='no' passthrough-symbol='0'/>
+                </black>
+
+            </regions>
+
+            <training on-off='on'>
+
+                <bypass>
+                    <!-- <header name='To:' find='spam@example.com'/> -->
+                    <!-- <header name='Received:' ordinal='1' find='friendlyhost.com'/> -->
+                </bypass>
+
+                <drilldown>
+                    <!-- <received ordinal='0' find='[12.34.56.'/> where we want to ignore 12.34.56.0/24 -->
+                    <!-- <received ordinal='0' find='mixed-source.com'/> -->
+                    <!-- <received ordinal='1' find='mixed-source-internal.com'/> -->
+                </drilldown>
+
+                <source>
+                    <!-- <header name='X-Use-This-Source:' received='mixedsource.com [' ordinal='0' /> -->
+                    <!-- <header name='X-Originating-IP:' received='hotmail.com [' ordinal='0' /> -->
+                </source>
+
+                <white>
+                    <result code='1'/>
+                    <!-- <header name='Received:' ordinal='0' find='.friendlyhost.com'/> -->
+                </white>
+
+            </training>
+
+        </gbudb>
+
+        <rule-panics>
+            <!--
+            <rule id='123456'/>
+            <rule id='123457'/>
+            -->
+        </rule-panics>
+
+        <!-- Platform Specific Configuration -->
+        <platform>
+            <mdaemon>
+                <ip-test on-off='on'/>
+                <configurator command='start notepad' append-path='yes'/>
+            </mdaemon>
+        </platform>
+
+        <msg-file type='rfc822'/>
+
+    </node>
+</snf>
+

Distribution_20101124/About-Wget-and-Gzip.txt

@@ -0,0 +1,4 @@
+Included with this distribution are the open-source "wget" and "gzip" files.  They are
+used in getRulebase.bat to download and decompress rulebase files. The "wget" and "gzip"
+utilities included here came from http://unxutils.sourceforge.net/ and are included only
+for your convenience.

Distribution_20101124/ChangeLog.txt

@@ -0,0 +1,449 @@
+SNF MDaemon Plugin Change Log...
+------------------------------------------------------------------------------
+
+20080626 - Version 3.0, It's official.
+
+Changed build information.
+Removed extraneous comments from configuration file.
+
+20080524 - Version V2-9rc6.25.7
+
+Optimized networking library for additional speed & stability by moving
+receive buffer allocation from heap to stack (automatic).
+
+Optimized timing parameters in SNFClient for improved speed. Polling dealys
+are now reduced to 10ms from 30ms.
+
+Removed speed-bug in SNFClient, 100ms guard time between retries was always
+executed after an attempt (even a successful attempt). The guard time is now
+condition and only fires on unsuccessful attempts.
+
+Updated XCI server logic to ensure non-blocking sockets for clients in all
+socket implementations.
+
+20080424 - Version V2-9rc6.24.6
+
+Refactored snfScanData.clear() to reduce heap work and fragments.
+
+Added mutex to scanMessageFile() entry point just in case some app attempts to
+put multiple threads through a single engine handler. scanMessage() is already
+protected and fully wraped by the new scanMessageFile() mutex.
+
+Added non-specific runtime exception handling to XHDR injection code.
+
+Added 2 retries w/ 300ms delay to remove original message in XHDR inject code.
+If remove fails after 3 attempts the injector throws.
+
+Added 2 retries w/ 300ms delay to rename temp file to msg in XHDR inject code.
+If rename fails after 3 attempts the injector throws.
+
+Added IPTest logging.
+
+20080416 - Version V2-9rc5.23.6
+
+Fixed bug where SNCY open() would fail on some Win* platforms with
+WSAEINVAL instead of the standard EINPROGRESS or EALREADY which were expected.
+Also added WSAEWOULDBLOCK to cover other "ambiguities" in windows sockets
+implementations. InProgress() on Win* now test for any of:
+
+WSAEINPROGRESS, WSAEALREADY, WSAEWOULDBLOCK, WSAEINVAL
+
+20080413 - Version V2-9rc5.22.6
+
+Fixed bug in TCPHost.open() where EALREADY was not counted as a version of
+EINPROGRESS. This would cause open() to throw an unnecessary exception when
+an open() required extra time.
+
+20080413 - Version V2-9rc5.21.6
+
+Extended timeout for SYNC session open() to the full session length. This way
+if a session takes a long time to open it still has a shot at success.
+
+20080411 - Version V2-9rc5.20.6
+
+Adjusted snfNETmgr to use non-blocking open in SYNC sessions. Open timeout
+is 1/3 of the session timeout. Session timeout is 2 * Session pacing. Open
+polling uses golden spiral delay from 10ms to 340ms.
+
+20080410 - Version V2-9rc5.19.6
+
+Adjusted XCI manager to use new snfCFGPacket paradigm in checkCFG().
+
+Adjusted snf_RulebaseHandler::addRulePanic() to use MyMutex and eliminated
+the AutoPanicMutex and waiting scheme.
+
+Refactored scanMessage() to use a ScopeMutex() rather than lock()/unlock().
+
+Refactored scanMessage() to use MyCFGPacket.isRulePanic() test.
+
+Redesigned snfCFGPacket handling to automate grab() / drop() functions.
+
+Fixed lock-up bug: Redesigned AutoPanic posting and checking mechanisms to 
+eliminate potential dead-lock condition. Under some conditions a precisely
+timed auto-panic posting could cause the RulebaesHandler mutex and the 
+AutoPanicMutex to become intertwined leading to a cascading deadlock. When
+this occurred all XCI processing threads and eventually the XCI listener
+thread would become blocked waiting to get the current configuration.
+
+20080409 - Version V2-9rc5.18.6
+
+Enhanced XCI exception handling and logging to provide additional detail.
+
+Added code to explicitely check for zero length files in scanMessagFile().
+Previously a zero length file would cause the CBFR module of the filter
+chain to throw an invalid buffer exception. Now if the message file is empty
+scanMessageFile() will throw a FileError stating FileEmpty!.
+
+20080407 - Version V2-9rc5.17.6
+
+Enhanced exception reporting in snfXCImrg
+
+20080405 - Version V2-9rc5.16.6
+
+Reduced safetly limits on status reports to 100K for status reports and 100K
+for samples. Previous values were 10M. Most full sessions from the busiest
+systems are < 50K total.
+
+Recoded sendDataTimeout() to break uploads into 512 byte chunks and insert
+delays only when a chunk is fragmented. This methodology improves reliability
+on Win* systems without any significant penalty on systems that don't need
+socket sends() to be in smaller chunks.
+
+Fixed TCPClient::transmit() and TCPHost::transmit() bug where returned byte
+count might be -1. Now returned byte counts can only be 0 or more.
+
+20080403 - Version SNF2-9vr5.15.5
+
+Minor modifications to networking module to better support non-blocking open()
+
+Updated SNFClient with new timing and non-blocking open(). Worst case return
+time from SNFClient estimated at 200 seconds (theoretically impossible). No-
+connection return time from SNFClient estimated at 20 seconds.
+
+20080326 - Version SNF2-9rc4.15.4
+
+Refactored snfNETmgr::sync() to consolidate non-blocking io routines.
+
+Added detailed thread status data to XCI listener thread.
+
+Refactored snfNETmgr::sync() to check a Timeout, removed TCPWatchdog.
+
+20080325 - Version SNF2-9rc4.12.4
+
+Added a "Rulebase Getter" feature as part of the snf_Reloader. When enabled
+the Rulebase Getter will launch a user defineable system() call whenever a
+new rulebase file is available. The call will be repeated until the condition
+is cleared by a successful update of the rulebase file. The Rulebase Getter
+will wait a configurable "guard time" between attempts. The default system()
+call is "getRulebase" with a guard time of 3 minutes. In most cases this will
+launch the provided getRulebase script which should be present in the start
+location of SNFServer on most systems. Best practice is to configure the full
+path to the update script. The system() call is made in a separate thread so
+that if the system() call hangs for some reason only the Rulebase Getter is
+stuck.
+
+Improved exception handling/reporting in scanMessageFile().
+
+Updated scanMessagFile() header injection code to accommodate messages with
+no body. Previous version would throw an exception when it could not find an
+injection point. The new version makes the injection point byte 0 and puts
+the injected headers at the top of the message using it's best guess about the
+type of line endings (CRLF or LF) to use.
+
+Updated Networking library to use SO_REUSEADDR by default on listeners.
+
+20080319 - Version SNF2-9rc4.11 
+
+Added IPScan on-off to snfmdplugin.xml. This allows users to turn off the
+IPScan feature without editing the Plugins.dat file as was previously
+required. The feature can now be enabled or disabled at will by editing the
+configuration file.
+
+Added Configuration editor options to snfmdplugin.xml. Previously the built-
+in configuration function was hard coded to start notepad with the config
+file. Now the system() call made by the ConfigFunc() can be edited in the
+configuration file. The configuration file name can be appended to the
+command optionally. The default is still to start notepad and append the
+configuration file path so that it is loaded automatically. It is hoped that
+GUI based configuration editors for the SNF plugin will be built by third
+parties and in the mean time folks can now configure their favorite XML file
+editor to modify their SNF plugin configuration.
+
+Modified API use fixed shutdown bug - The plugin used to initialize the SNF
+scanning engine when the DLL was loaded and would shut it down when the DLL
+was unloaded. Now the Startup and Shutdown functions in the MDaemon plugin
+API. This ensures that the engine components are started and shutdown in the
+proper sequence. 
+
+Included new SNFEngine core (excerpts from that change log included).
+
+20080318 - SNF2-9rc1.11.exe Consolidated several mods/fixes
+
+Corrected scan error logging bug. Was posting <s/> now posts <e/>.
+
+Updated scan error logging to be more uniform with non-scan errors.
+
+Developed various script prototypes for postfix integration & automated
+updates on win* systems using the new UpdateReady.txt file mechanism.
+
+Fixed a bug in scanMessageFile() where an \n\n style insertion point
+would never be detected.
+
+Modified scanMessageFile() header injection to strip <CR> from line ends
+when the message file provided does not use them. The line-end style of
+the message file is detected while locating the insertion point. If the
+insertion point (first blank line) does not use <CR><LF> then the SNF
+generated X-Headers are stripped of <CR> in a tight loop before injection.
+
+Enhanced error and exception reporting in SNFMulti.cpp scanMessageFile().
+
+Enhanced exception handling in networking module. All exceptions now
+throw descriptive runtime_error exceptions.
+
+20080306 - SNF2-9rc1.8.exe (FIRST RELEASE CANDIDATE for VERSION 3!)
+
+Added Drilldown Header Directive Functions - When the candidate source IP
+comes from a header matching a drilldown directive the IP is marked "Ignore"
+in GBUdb and the candidate is no longer eligible to be the source for that
+message. This allows SNF to follow the trusted chain of devices (by IP) down
+to the actual source of the message. It is handy for ignoring net blocks
+because it can match partial IPs but it is designed to allow SNF to learn
+it's way through the servers at large ISPs so that the original source for
+each message can be evaluated directly.
+
+Added Source Header Directive Functions - This feature allows SNF to acquire
+the source IP for a message from a specific header rather than searching
+through the Received headers in the message. This is useful when the original
+source for a message is not represented in Received headers. For example:
+Hotmail places the originating source IP in a special header and does not
+provide a Received header for that IP. This feature is protected from abuse
+by a "Context" feature which only activates the source header directive when
+specific content is found in a specific received header. Using the above
+example, this feature can be configured so that a Hotmail source header would
+only be read if the top Recieved header contained "hotmail.com [" indicating
+that the ptr lookup for the header matched the hotmail domain. Note: When a
+source is pulled from a header directive that source is put into a synthetic
+Received header and injected into the scanning stream (not the message) as
+the first Received header.
+
+Added forced source IP to XCI - It is now possible to "inject" or "force"
+the source IP for any message by providing that IP in the XCI request or
+directly in a scan...() function call. This allows the calling application
+to provide the source IP for a message ahead of any Received headers that
+might be in the message. This is useful when the calling application knows
+the original source IP for the message but that IP is not represented in
+the Received headers and it is not desireable to use the Source Header
+Directive mechanism.
+
+Added forced source IP mode to SNFClient - It is now possible to call the
+SNFClient utility with an IP4Address using the syntax:
+
+SNFClient -source=12.34.56.78
+
+The -source mode of SNFClient exercises the forced source IP feature in
+the XCI (see above)
+
+Added Status Report features to SNFClient and XCI - It is now possible to
+request the latest status.second, status.minute, or status.hour data via
+the XCI and SNFClient. The syntax for requesting a status report using the
+SNFClient is:
+
+SNFClient -status.second
+SNFClient -status.minute
+SNFClient -status.hour
+
+In addition to providing status reports the SNFClient in this mode will
+return a nonzero value (usually 99) if it is unable to get a status report
+from SNFServer. This feature can be used to verify that SNFServer is up
+and responding. If SNFServer is OK then the result code returned is 0.
+
+Added result codes to SNFClient -test and XCI IP test functions - The XCI
+engine has been upgraded to provide the range value for the IP under test
+as well as the symbolic result code associated with that range. This allows
+the -test function to provide results that are consistent with the GBUdb
+configuration without additional processing: For example, if the IP falls
+in the Caution range then the Caution result code will be returned just
+as if a message had been scanned with the same IP and no pattern match
+occurred. The same is true for Truncate and Black range hits.
+
+Added Timestamp and Command Line Parameter data to SNFClient.exe.err - When
+an error occurs with SNFClient that may not appear in the SNFServer logs an
+entry is appended to the SNFClient.exe.err file. That in itself is not new.
+The new feature is that the entries added to the SNFClient.exe.err file now
+include timestamp and command line data to aid in debugging.
+
+Updated the Configuration Log to include all of the current configuration
+features and to improve it's readability.
+
+20080207 - SNF2-9b1.7.exe
+
+SYNC Timeout now 2x SYNC Schedule
+
+SNFServer now produces an UpdateReady.txt file when the UTC timestamp on
+the SYNC server is newer than the UTC timestamp of the active rulebase. It
+is presumed that a suitable update script or program will run periodically
+and download a fresh rulebase file if the UpdateReady.txt file is present.
+The update script should remove the UpdateReady.txt file when it completes
+a successful download of the new rulebase file.
+
+Added available rulebase UTC in status reports <udate utc.../>
+
+Added Automatic path fixup for ending / or \
+
+Added option to use local time in log rotation <rotation localtime='no'/>
+The default is still utc.
+
+20071102 - SNF2-9b1.6.exe
+
+Increased MAX_EVALS from 1024 to 2048.
+
+Adjusted defult range envelopes in snf_engine.xml to be more conservative.
+
+
+20071017 - Version SNF2-9b1.5
+
+Added a missing #include directive to the networking.hpp file. The
+missing #include was not a factor on Linux and Windows systems but
+caused compiler errors on BSD systems.
+
+Corrected a bug in the GBUdb White Range code where any message with a
+white range source IP was being forced to the white result code. The
+engine now (correctly) only forces the result and records the event when
+a black pattern rule was matched and the White Range IP causes that
+scan result to be overturned. If the scan result was not a black pattern
+match then the original scan result is allowed to pass through.
+
+Corrected a bug in the Header Analysis filter chain module that would
+cause the first header in the message to be ignored in some cases.
+
+Corrected an XML log format problem so that <s/> elements are correctly
+open ended <s ....> or closed (empty) <s..../> according to whether they
+have subordinate elements.
+
+Adjusted the GBUdb header info format. The order of the Confidence
+figure and Probabilty figure is now the same as in the XML log files
+(C then P). The confidence and probability figures are now preceeded
+with c= and p= respectively so that it's easy to tell which is which.
+
+20071009 Version 2-9b1.4
+
+Tightened up the XCI handler code and removed the watchdog. The watchdog
+would restart the listener if there were no connections in 5 minutes. It
+was originally added to provide additional stability, however in practice
+there have been no "stalled listeners". Also, a stalled listener would
+likely be a sign of a different problem that the watchdog would tend to
+hide.
+
+Modified and refactored the XCI configuration management code. All XCI config
+changes and up-down operations are now handled in a single function except
+upon exit from the main XCI thread where XCI_shutdown() is always called.
+
+Added some more detailed exception handling code to the XCI component so that
+more data will be logged in the event of an error.
+
+Reviewed and modified the InstallInstructions.txt file. Removed this log
+to this separate file.
+
+Modified the snfmdplugin.xml file to properly configure the new features in
+the engine.
+
+* Header training directives and new <training/> section.
+
+* XCI interface configuration.
+
+* Tweaks to GBUdb ranges.
+
+* msg-file type configuration (not used in MDaemon, but configured anyway)
+
+----
+
+Version 2-9a11 (engine a53)
+
+* Enhanced IP extraction from Received headers so that any unexpected bytes
+  between the [ and ] will force the attempt to be aborted.
+
+* Fix the IP test code so that the IP 0.0.0.0 cannot be the source IP and
+  cannot be tested.
+
+Version 2-9a11 (engine a52)
+
+* Corrected plug-in log entry logic. Allowed/Rejected tag now comes directly
+  from the message rejection logic and is accurate in all cases.
+
+Version 2-9a10 (engine a52)
+
+* Corrected a bug in the MessageIPFunc where Ignore flagged IPs would still
+  cause rejected messages if the statistics were in the Truncate range. Now
+  messages are rejected in only two cases:
+
+  The Flag is _Ugly_ and the rating is _Truncate_ or, the Flag is _Bad_.
+
+Version 2-9a9 (engine a52)
+
+* Adjusted IPtest module in HeaderAnalysis to handle TooManyIPs exception
+  locally and silently.
+
+* Increased HeaderAnalysis IP limit from 20 to 50.
+
+Version 2-9a9 (engine a51)
+
+* Corrected possible heap corruption bug in EvaulationMatrix Destructors.
+
+* Added trace strings to scanMessage() for tighter panic reporting.
+
+* Added caching to snf_engine Evaluator allocation scheme.
+
+* Added optimizations to snf_engine Evaluator safety checks.
+
+Version 2-9a8
+
+* Added deep exception handling to Token Matrix objects.
+
+Version 2-9a7
+
+* Exception handling throughout the engine has been refactored to use std:exception
+  and to provide additional detail via e.what()
+
+* The plug-in log will now show e.what() data as SNF Debug: whenever an exception
+  is thrown during a message scan.
+
+Version 2-9a6
+
+* Adjusted .ctl file path converter to accept either .msg or .tmp paths.
+
+Version 2-9a5
+
+A lot of new things were learned, updated, and corrected.
+
+* Fixed the "lockup" when the plugin failed to start successfully. The cause of this
+  appears to be a threading issue associated with DLLs that are being initialized.
+  If threads are created during the initialization of a DLL, the DLL must succeed!
+  The threads that are created do not get any cycles until after the DLL is loaded
+  successfully. As a result, if the initialization process attempts to join() these
+  threads a deadlock is created. The fix was to allow the SNF plugin initialization
+  process to succeed in all cases while setting a flag that forces the engine to
+  be inert if the initialization was not successful. When the DLL is later unloaded
+  the threads are already running so the join() calls that are part of the engine
+  cleanup code are able to complete without incident.
+
+* Installed detailed exception handling for the start-up sequence. The plugin can
+  now report on very specific reasons for failing to initialize properly.
+
+* Fixed a bug in the GBUdbIgnoreList processor where long lines would cause the
+  remainder of the file not to be read. The line length limit still exists, but
+  it is now 255 characters which is unlikely to occur and would be considered
+  incorrect formatting.
+
+* The threading library now includes top-level exception handling to trap any
+  exception that was not handled by myTask(). Along with this two flags were
+  added to thread objects: isRunning() and isBad(). isRunning() is true when a
+  thread object is still active. isBad() is true if the thread failed to start or
+  an exception escaped myTask().
+
+* At least one GBUdbIgnoreList entry is now REQUIRED. If the count of IPs from the
+  GBUdbIgnoreList.txt file is less than 1 (or the file is missing) then the plug-in
+  will complain and fail to start.
+
+* snf2check.exe has been removed from the distribution for the time being since it
+  causes some systems to strip the attachment or block the email. This is the same
+  program that is already on existing SNF systems.

Distribution_20101124/GBUdbIgnoreList.txt

@@ -0,0 +1,10 @@
+# List of IPs to Ignore on startup
+# Each IP in this list is set to Ignore in GBUdb when
+# The configuration is loaded.
+# Hash mark on the beginning of a line indicates a comment.
+# Comments after an IP are also ignored.
+# One line per IP. Sorry, no CIDR yet.
+# Be sure to list ALL of your gateways :-)
+
+127.0.0.1	# ignore localhost, of course.
+

Distribution_20101124/InstallInstructions.txt

@@ -0,0 +1,146 @@
+MDaemon Plugin V2.9rc* (V3) installation instructions
+------------------------------------------------------------------------------
+
+1. Locate your \MDaemon directory (Usually c:\MDaemon)
+
+2. Create the directory \MDaemon\SNF
+
+3. Copy the distribution files to \MDaemon\SNF
+
+4. Edit identity.xml in notepad.
+4.1. Replace licensid with your SNF license ID.
+4.2. Replace authenticationxx with your SNF authentication code.
+
+5. Adjust/Create your Plugins.dat file (\MDaemon\App\Plugins.dat)
+
+5.1. If you already have a Plugins.dat file
+5.1.1. Copy the contents of the Plugins.dat file in the distribution
+       to the Plugins.dat file you have.
+5.1.2. If you have a [Message Sniffer] section in your Plugins.dat
+       file then make a copy of it (for backup) then remove that
+       section. (This will disable your previous Message Sniffer
+       installation)
+
+5.2. If you do not already have a Plugins.dat file
+5.2.1. Copy the Plugins.dat file from the distribution to your
+       \MDaemon\App directory.
+
+6. Copy the snf-groups.cf into \MDaemon\SpamAssassin\rules
+
+7. Download your SNF rulebase file and place it in your SNF directory.
+7.1. Once you've signed up for a 30 Day free Trial or purchased a license for
+     SNF you will receive update notifications via email. These notifications
+     contain instructions on how to download your rulebase file. You can get
+     your 30 Day Free Trial started by visiting www.armresearch.com.
+7.2. We have included an update script and utilities that you can use to
+     automate updates to your rulebase file. The SNFServer engine that runs
+     inside the plugin will produce an UpdateReady.txt file any time the local
+     rulbase file is older than the latest available update. The included
+     getRulebase.cmd script checks for this file and uses the open source
+     wget and gzip utilities to download, validate, and replace your rulebase
+     file automatically.
+7.2.1. Edit the top of the getRulebase.cmd file to establish the correct
+       working directory, authentication string, and license ID for your
+       rulebase files.
+7.2.2. Verify that the <update-script/> section of your snfmdplugin.xml file
+       points to the correct location of the getRulebase.cmd script. This new
+       feature will automatically run the getRulebase.cmd script whenever a
+       newer rulebase file is available on our servers.
+
+8. Edit the GBUdbIgnoreList.txt file in notepad.
+8.1 Add the IP of any gateways you have as well as any systems you
+    have that send mail through your mail server.
+8.2 It is very important to populate your GBUdbIgnoreList if you have
+    gateways ahead of your mail server or else GBUdb will learn that
+    those systems are responsible for sending spam! The GBUdb engine
+    uses the ignore list to determine the actual source IP of the message.
+    The first IP it sees in the headers that is not on the ignore list
+    is determined to be the source IP for the message. Since most email
+    "in the wild" these days are spam, any gateways that are not listed
+    will be seen to be sending mostly spam - in error, of course.
+8.3 You cannot enter network blocks in the GBUdbIgnoreList.txt file. If
+    you wish to ignore (mark as infrastructure) blocks of IPs then you should
+    use the <drilldown/> section of the snfmdplugin.xml file to enter
+    patterns that match the network blocks you want to ignore. For example,
+    if you want to ignore servers in the 12.34.56.0/24 network block then
+    you would enter a drilldown rule like:
+
+    <drilldown>
+        ...
+        <received ordinal='0' find='[12.34.56.'/>
+
+    The rule tells GBUdb to learn to ignore any IP in the top (ordinal 0)
+    received header if that header contains the string '[12.34.56.'. Of
+    course that string will match every IP in the 12.34.56.0/24 class C
+    block so any servers in that block which deliver mail to the SNF equiped
+    server will be learned as infrastructure (ignore flag set).
+
+9. Review and adjust your snfmdplugin.xml file
+9.1. Check the paths at the top of the file and make sure they are complete and
+     correct. In most cases the defaults will work, but if you've installed
+     MDaemon & SNF on a different drive or in a different directory it would
+     be best to update these paths:
+9.1.1. Find/Check <snf><node identity.../>
+9.1.2. Find/Check <snf><node><paths><log path.../>
+9.1.3. Find/Check <snf><node><paths><rulebase path.../>
+9.1.4. Find/Check <snf><node><paths><workspace path.../>
+9.2. If you have any addresses where people legitimately send spam such as an
+     abuse reporting address or support address then you should enter that
+     address into the <snf><node><gbudb><training><bypass/> section of the
+     snfmdplugin.xml file. For example an abuse reporting address might look
+     like this:
+
+     <bypass>
+         ...
+         <header name='To:' find='spam@example.com'/>
+
+     The rule tells GBUdb to bypass it's training mechanism if it finds a
+     'To:' header in a message that contains 'spam@example.com'. This should
+     prevent customer's IPs from being learned as spam sources when they send
+     messages to spam@example.com.
+
+9.3. Your system practices and policies may require additional rules in order
+     to get the best performance from the GBUdb system. For more information
+     please check out www.armresearch.com, support@armresearch.com, and our
+     community list sniffer@sortmonster.com.
+
+10. Restart MDaemon.
+
+11. Verify the SNF plugin is installed
+11.1. In the plug-ins log tab you should see:
+      Attempting to load 'SNF' plugin
+      *  ConfigFunc: ConfigFunc@4 (Ok, ready to use)
+      *  StartupFunc: Startup@4 (Ok, ready to use)
+      *  ShutdownFunc: Shutdown@4 (Ok, ready to use)
+      *  PreMessageFunc:  (NULL)
+      *  PostMessageFunc: MessageFunc@8 (Ok, ready to use)
+      *  SMTPMessageFunc: MessageIPFunc@8 (Ok, ready to use)
+      *  SMTPMessageFunc2:  (NULL)
+      *  SMTPMessageFunc3:  (NULL)
+      *  DomainPOPMessageFunc:  (NULL)
+      *  MultiPOPMessageFunc:  (NULL)
+      *  Result: success (plugin DLL loaded in slot 0)
+      ----------
+      SNF plugin is starting up
+      SNFMulti Engine Version 2.9rc11 Build: Mar 20 2008 15:18:30
+      SNF MDaemon Plugin Version 2-9rc4 Build: Mar 20 2008 15:17:20
+      SNF Config: C:\MDaemon\SNF\SNFMDPlugin.xml
+      ----------
+
+      Note that the slot may be different if you have other plugins.
+
+11.2. When your system processes a message you should see something like:
+
+      SNF MessageScan: c:\mdaemon\queues\local\md50000000039.msg, Result=0
+
+      If you have a valid AntiVirus for MDaemon license you should also see
+      a line similar to this:
+
+      SNF IPScan: C:\MDaemon\Queues\Inbound\md50000000029.msg, 192.168.0.102, {Ugly, p=-1, c=0.303425,  Normal} Allowed.
+
+11.3. In your messages you should see some new headers similar to:
+
+      X-MessageSniffer-GBUdb-Result: 0, 192.168.0.102, Ugly -1 0.303425 Source Normal
+      X-MessageSniffer-Scan-Result: 0
+      X-MessageSniffer-Patterns:
+	0-0-0-998-c

Distribution_20101124/Plugins.dat

@@ -0,0 +1,11 @@
+[SNF]
+MenuText=Configure SNF Plug-in
+Enable=Yes
+DllPath=c:\MDaemon\SNF\snfmdplugin.dll
+StartupFuncName=Startup@4
+ConfigFuncName=ConfigFunc@4
+PostMessageFuncName=MessageFunc@8
+SMTPMessageFuncName=MessageIPFunc@8
+ShutdownFuncName=Shutdown@4
+PluginDoesAllLogging=No
+NonAuthOnly=Yes

Distribution_20101124/SNFClient_readme.txt

@@ -0,0 +1,182 @@
+SNFClient Readme
+
+Command line client for SNF. This utility formats and processes SNF_XCI
+requests through the SNF Engine working on the local machine. In general
+this utility can be used as a replacement for the earlier SNF command
+line scanner. It is also useful for other uses such as debugging and
+communicating with GBUdb.
+
+Note: Unlike prior versions of SNF, this command line utility does not
+need to be "branded" (renamed for the SNF license id).
+
+_________
+Help Mode
+
+SNFClient.exe
+
+  When called with no command line parameters the utility produces
+  help and version information.
+
+__________
+Debug Mode
+
+SNFDebugClient.exe
+
+  When "debug" or "Debug" appears in the path to the program name
+  or if the program's name is altered to include the word "debug" or
+  "Debug" then the program will produce additional information about
+  it's operation to aid in debugging problems. This includes the
+  entire raw SNF_XCI request and response.
+
+__________________
+Message Scan Modes
+
+  These modes are used to scan email message files (the data part of
+  smtp). This utility can be used as a drop-in replacement for previous
+  verions of SNF (Message Sniffer) for scanning messages. However, this
+  new version does not need to be "branded" (renamed for the license id)
+  and will ignore the authentication string if it is provided. Also,
+  since the newer version of SNF uses a client-server model and not a
+  peer-server model, there is no need for a "persistent" mode.
+
+  If "persistent" is passed to this utility on the command line as it
+  would be used in prior versions of SNF then it will be treated like
+  a file name and the scan will normally fail since a file named
+  "persistent" is not likely to exist.
+
+SNFClient.exe <FileNameToScan>
+
+  Scan Mode: Scans <FileNameToScan> and returns a result code.
+
+SNFClient.exe <authenticationxx> <FileNameToScan>
+
+  Compatibility Mode: Ignores <authenticationxx> then scans the
+  <FileNameToScan> and returns a result code. This mode provides
+  drop-in compatibility with previous versions of SNF.
+
+SNFClient.exe -xhdr <FileNameToScan>
+
+  XHeader Mode: Scans <FileNameToScan> and returns the result. Also
+  outputs the contents of the X-Headers created by the SNF engine. If
+  the SNF engine is configured to inject these headers then they will
+  also have been injected into the <FileNameToScan>.
+
+  The SNF Engine can be configured to provide the X-Headers only to
+  the API without injecting them. In this case the XHeader Mode will
+  display the X-Headers that would be injected, but they will not
+  have been injected into the <FileNameToScan>.
+
+  If the SNF Engine is configured not to produce X-Headers (none) then
+  the XHeader Mode will not produce X-Headers because they will not
+  have been generated by the engine.
+
+  (note: -xhdr and -source options can be combined)
+
+
+SNFClient.exe -source=<IP4Address> <FileNameToScan>
+
+  Source-IP Mode: Scans <FileNameToScan> and returns the result. The
+  provided source IP is injected into the scan as the first Received
+  header so that the scanning engine will presume the IP is the source
+  of the message. This allows you to pre-define the source IP for the
+  message when there is no other received header or when the received
+  headers may be incorrect or may not present the actual source of
+  the message.
+
+  (note: -xhdr and -source options can be combined)
+
+_____________________________
+SNFServer Status Report Modes
+
+SNFClient.exe -status.second
+SNFClient.exe -status.minute
+SNFClient.exe -status.hour
+
+  This mode returns the latest posted status report as indicated.
+  Normally these status reports are also posted to files in the
+  SNFServer workspace.
+
+  In this mode the SNFClient will return a result code (error level)
+  of 0 when the request is successful and 99 (or some nonzero value)
+  when the request is not successful. This allows the SNFClient to
+  be used to verify that the SNFServer is running.
+
+  Note: In most other modes the SNFClient returns a fail-safe 0
+  result code to avoid tagging messages as spam when there are errors.
+
+________________________
+XCI Server Command Modes 
+
+These features will expand as needed in later versions.
+
+SNFClient.exe -shutdown
+
+  If the SNF Engine is running in an application that accepts SNF_XCI
+  server commands then this mode will send that command. The shutdown
+  command may have no effect if the application does not use the SNF_XCI
+  server commnand interface or does not recognize the command.
+
+___________
+GBUdb Modes
+
+  These modes are used to communicate with the GBUdb system on the
+  local node. It is possible to test (read out) an IP record or make
+  any of a number of changes to IP data in the GBUdb.
+
+SNFClient.exe -test <IP4Address>
+
+  Returns the current GBUdb statistics for the <IP4Address>
+
+  SNFClient also returns a result code that matches the GBUdb range
+  for the tested IP. These ranges are defined in the SNFServer
+  configuration file. By default they are:
+
+  20 - Truncate
+  63 - Black
+  40 - Caution
+   0 - Normal
+
+SNFClient.exe -set <IP4Address> <flag> <bad> <good>
+
+  Creates or updates the data for <IP4Address> as provided. The
+  <IP4Address> must be provided as well as at least one of
+  <flag>, <bad>, and <good>. If <flag>, <bad>, or <good> are
+  to be left unchanged then they should be entered as a dash "-".
+
+  Examples:
+
+  Set all data for an IP. The flag will be "ugly", the bad count
+  will be 0 and the good count will be 1000.
+
+  SNFClient.exe -set 12.34.56.78 Ugly 0 1000
+
+  Set the flag to "ignore" and do not change the counts.
+
+  SNFClient.exe -set 12.34.56.78 ignore - -
+
+  Set the good count to 400 and do not change anything else.
+
+  SNFClient.exe -set 12.34.56.78 - - 400
+
+SNFClient.exe -good <IP4Address>
+
+  Creates or updates statistics for the <IP4Address>. Increases the
+  good count by one. (Record a good event)
+
+SNFClient.exe -bad <IP4Address>
+
+  Creates or updates statistics for the <IP4Address>. Increases the
+  bad count by one. (Record a bad event)
+
+SNFClient.exe -drop <IP4Address>
+
+  Removes all local data for the <IP4Address>. Anything the local
+  system "knows" about the IP is forgotten. Next time the IP is
+  encountered it will be treated as new.
+
+____________________
+For More Information
+
+See www.armresearch.com
+Copyright (C) 2007-2008 Arm Research Labs, LLC.
+

Distribution_20101124/getRulebase.cmd

@@ -0,0 +1,47 @@
+@ECHO OFF
+SETLOCAL 
+
+
+REM ----- Edit This Section --------
+
+SET SNIFFER_PATH=\mdaemon\snf
+SET AUTHENTICATION=authenticationxx
+SET LICENSE_ID=licensid
+
+REM --------------------------------
+
+CD /d %SNIFFER_PATH%
+
+if not exist UpdateReady.txt GOTO DONE
+
+if exist UpdateReady.lck GOTO DONE
+
+:DOWNLOAD
+ 
+COPY UpdateReady.txt UpdateReady.lck
+wget http://www.sortmonster.net/Sniffer/Updates/%LICENSE_ID%.snf -O %LICENSE_ID%.new.gz --header=Accept-Encoding:gzip --http-user=sniffer --http-passwd=ki11sp8m
+
+if exist %LICENSE_ID%.new.gz gzip -d -f %LICENSE_ID%.new.gz
+
+snf2check.exe %LICENSE_ID%.new %AUTHENTICATION%
+
+if errorlevel 1 goto CLEANUP
+
+if exist %LICENSE_ID%.old del %LICENSE_ID%.old
+
+rename %LICENSE_ID%.snf %LICENSE_ID%.old
+rename %LICENSE_ID%.new %LICENSE_ID%.snf
+
+if exist UpdateReady.txt del UpdateReady.txt
+if exist UpdateReady.lck del UpdateReady.lck
+
+:CLEANUP
+
+if exist %LICENSE_ID%.new del %LICENSE_ID%.new
+if exist UpdateReady.lck del UpdateReady.lck 
+
+:DONE
+
+ENDLOCAL
+
+

Distribution_20101124/identity.xml

@@ -0,0 +1 @@
+<snf><identity licenseid='licensid' authentication='authenticationxx'/></snf>

Distribution_20101124/snf-groups.cf

@@ -0,0 +1,80 @@
+## Basic rules for detecting Message Sniffer header emissions
+## so that they can be given scores in subsequent SpamAssassin
+## scanning. Modify the scores and headers as needed for your
+## system.
+
+score    SNF_IPTRUNCATE     10
+describe SNF_IPTRUNCATE     IP Source consistently sends spam
+header   SNF_IPTRUNCATE     X-MessageSniffer-Scan-Result =~ /20/
+
+score    SNF_IPCAUTION      3
+describe SNF_IPCAUTION      New IP source mixed scan results
+header   SNF_IPCAUTION      X-MessageSniffer-Scan-Result =~ /40/
+
+score    SNF_IPBLACK        4
+describe SNF_IPBLACK        Static IP rules and GBUdb Black
+header   SNF_IPBLACK        X-MessageSniffer-Scan-Result =~ /63/
+
+score    SNF_OBFUSCATION    5
+describe SNF_OBFUSCATION    Obfuscation detection
+header   SNF_OBFUSCATION    X-MessageSniffer-Scan-Result =~ /62/
+
+score    SNF_ABSTRACT       5
+describe SNF_ABSTRACT       Abstracted spam patterns
+header   SNF_ABSTRACT       X-MessageSniffer-Scan-Result =~ /61/
+
+score    SNF_GENERAL        5
+describe SNF_GENERAL        General spam content - unclassified
+header   SNF_GENERAL        X-MessageSniffer-Scan-Result =~ /60/
+
+score    SNF_GAMBLE         5
+describe SNF_GAMBLE         Gambling and Casino spam patterns
+header   SNF_GAMBLE         X-MessageSniffer-Scan-Result =~ /59/
+
+score    SNF_DEBT           5
+describe SNF_DEBT           Debt and Credit offer spam patterns
+header   SNF_DEBT           X-MessageSniffer-Scan-Result =~ /58/
+
+score    SNF_GETRICH        5
+describe SNF_GETRICH        Home Biz, Stock Push, get rich quick
+header   SNF_GETRICH        X-MessageSniffer-Scan-Result =~ /57/
+
+score    SNF_TONER          5
+describe SNF_TONER          Ink and Toner offer spam patterns
+header   SNF_TONER          X-MessageSniffer-Scan-Result =~ /56/
+
+score    SNF_MALWARE        5
+describe SNF_MALWARE        Virus, worm, and exploit patterns
+header   SNF_MALWARE        X-MessageSniffer-Scan-Result =~ /55/
+
+score    SNF_ADULT          5
+describe SNF_ADULT          Porn and Adult spam patterns
+header   SNF_ADULT          X-MessageSniffer-Scan-Result =~ /54/
+
+score    SNF_SCAM           5
+describe SNF_SCAM           Phishing, 419, and other scam patterns
+header   SNF_SCAM           X-MessageSniffer-Scan-Result =~ /53/
+
+score    SNF_SNAKEOIL       5
+describe SNF_SNAKEOIL       Drugs, diet aids, health scams
+header   SNF_SNAKEOIL       X-MessageSniffer-Scan-Result =~ /52/
+
+score    SNF_SPAMWARE       5
+describe SNF_SPAMWARE       Spamming tools and spam hosting offers
+header   SNF_SPAMWARE       X-MessageSniffer-Scan-Result =~ /51/
+
+score    SNF_DATATHEFT      5
+describe SNF_DATATHEFT      Movies, software, unlimited downloads
+header   SNF_DATATHEFT      X-MessageSniffer-Scan-Result =~ /50/
+
+score    SNF_AVPUSH         5
+describe SNF_AVPUSH         Antivirus software push
+header   SNF_AVPUSH         X-MessageSniffer-Scan-Result =~ /49/
+
+score    SNF_INSURANCE      5
+describe SNF_INSURANCE      Insurance offer patterns
+header   SNF_INSURANCE      X-MessageSniffer-Scan-Result =~ /48/
+
+score    SNF_TRAVEL         5
+describe SNF_TRAVEL         Travel offer patterns
+header   SNF_TRAVEL         X-MessageSniffer-Scan-Result =~ /47/

Distribution_20101124/snfmdplugin.xml

@@ -0,0 +1,156 @@
+<!-- SNFMulti V3.0 Configuration File, Setup: Typical of MDaemon Plugin -->
+<!-- http://www.armresearch.com/support/articles/software/snfServer/config/snfEngine.jsp -->
+
+<snf>
+    <node identity='/MDaemon/SNF/identity.xml'>
+
+        <paths>
+            <log path='/MDaemon/SNF/'/>
+            <rulebase path='/MDaemon/SNF/'/>
+            <workspace path='/MDaemon/SNF/'/>
+        </paths>
+
+        <logs>
+
+            <rotation localtime='no'/>
+
+            <status>
+                <second log='yes' append='no'/>
+                <minute log='yes' append='no'/>
+                <hour log='no' append='no'/>
+            </status>
+
+            <scan>
+                <identifier force-message-id='no'/>
+                <classic mode='none' rotate='no' matches='none'/>
+                <xml mode='file' rotate='yes' matches='all' performance='yes' gbudb='yes'/>
+
+                <xheaders>
+                    <output mode='inject'/>
+
+                    <version on-off='off'>X-MessageSniffer-Version</version>
+                    <license on-off='off'>X-MessageSniffer-License</license>
+                    <rulebase on-off='off'>X-MessageSniffer-RulebaseUTC</rulebase>
+                    <identifier  on-off='off'>X-MessageSniffer-Identifier</identifier>
+                    <gbudb on-off='on'>X-MessageSniffer-GBUdb-Result</gbudb>
+                    <result on-off='on'>X-MessageSniffer-Scan-Result</result>
+                    <matches on-off='on'>X-MessageSniffer-Patterns</matches>
+
+                    <black on-off='off'>X-MessageSniffer-Spam: Yes</black>
+                    <white on-off='off'>X-MessageSniffer-White: Yes</white>
+                    <clean on-off='off'>X-MessageSniffer-Clean: Yes</clean>
+                    <symbol on-off='off' n='0'>X-MessageSniffer-SNF-Group: OK</symbol>
+                    <symbol on-off='off' n='20'>X-MessageSniffer-SNF-Group: Truncated</symbol>
+                    <symbol on-off='off' n='40'>X-MessageSniffer-SNF-Group: Caution</symbol>
+                    <symbol on-off='off' n='63'>X-MessageSniffer-SNF-Group: Black</symbol>
+                    <symbol on-off='off' n='62'>X-MessageSniffer-SNF-Group: Obfuscation</symbol>
+                    <symbol on-off='off' n='61'>X-MessageSniffer-SNF-Group: Abstract</symbol>
+                    <symbol on-off='off' n='60'>X-MessageSniffer-SNF-Group: General</symbol>
+                    <symbol on-off='off' n='59'>X-MessageSniffer-SNF-Group: Casinos-Gambling</symbol>
+                    <symbol on-off='off' n='58'>X-MessageSniffer-SNF-Group: Debt-Credit</symbol>
+                    <symbol on-off='off' n='57'>X-MessageSniffer-SNF-Group: Get-Rich</symbol>
+                    <symbol on-off='off' n='56'>X-MessageSniffer-SNF-Group: Ink-Toner</symbol>
+                    <symbol on-off='off' n='55'>X-MessageSniffer-SNF-Group: Malware</symbol>
+                    <symbol on-off='off' n='54'>X-MessageSniffer-SNF-Group: Porn-Dating-Adult</symbol>
+                    <symbol on-off='off' n='53'>X-MessageSniffer-SNF-Group: Scam-Phishing</symbol>
+                    <symbol on-off='off' n='52'>X-MessageSniffer-SNF-Group: Snake-Oil</symbol>
+                    <symbol on-off='off' n='51'>X-MessageSniffer-SNF-Group: Spamware</symbol>
+                    <symbol on-off='off' n='50'>X-MessageSniffer-SNF-Group: Media-Theft</symbol>
+                    <symbol on-off='off' n='49'>X-MessageSniffer-SNF-Group: AV-Push</symbol>
+                    <symbol on-off='off' n='48'>X-MessageSniffer-SNF-Group: Insurance</symbol>
+                    <symbol on-off='off' n='47'>X-MessageSniffer-SNF-Group: Travel</symbol>
+
+                </xheaders>
+            </scan>
+        </logs>
+
+        <network>
+            <sync secs='30' host='sync.messagesniffer.net' port='25'/>
+            <update-script on-off='on' call='/MDaemon/SNF/getRulebase.cmd' guard-time='180'/>
+        </network>
+
+        <xci on-off='on' port='9001'/>
+
+        <gbudb>
+            <database>
+
+                <condense minimum-seconds-between='600'>
+                    <time-trigger on-off='on' seconds='86400'/>
+                    <posts-trigger on-off='off' posts='1200000'/>
+                    <records-trigger on-off='off' records='600000'/>
+                    <size-trigger on-off='on' megabytes='150'/>
+                </condense>
+
+                <checkpoint on-off='on' secs='3600'/>
+
+            </database>
+
+            <regions>
+
+                <white on-off='on' symbol='0'>
+                    <edge probability='-1.0' confidence='0.4'/>
+                    <edge probability='-0.8' confidence='1.0'/>
+                    <panic on-off='on' rule-range='1000'/>
+                </white>
+
+                <caution on-off='on' symbol='40'>
+                    <edge probability='0.4' confidence='0.0'/>
+                    <edge probability='0.8' confidence='0.5'/>
+                </caution>
+
+                <black on-off='on' symbol='63'>
+                    <edge probability='0.8' confidence='0.2'/>
+                    <edge probability='0.8' confidence='1.0'/>
+                    <truncate on-off='on' probability='0.9' peek-one-in='5' symbol='20'/>
+                    <sample on-off='on' probability='0.8' grab-one-in='5' passthrough='no' passthrough-symbol='0'/>
+                </black>
+
+            </regions>
+
+            <training on-off='on'>
+
+                <bypass>
+                    <!-- <header name='To:' find='spam@example.com'/> -->
+                    <!-- <header name='Received:' ordinal='1' find='friendlyhost.com'/> -->
+                </bypass>
+
+                <drilldown>
+                    <!-- <received ordinal='0' find='[12.34.56.'/> where we want to ignore 12.34.56.0/24 -->
+                    <!-- <received ordinal='0' find='mixed-source.com'/> -->
+                    <!-- <received ordinal='1' find='mixed-source-internal.com'/> -->
+                </drilldown>
+
+                <source>
+                    <!-- <header name='X-Use-This-Source:' received='mixedsource.com [' ordinal='0' /> -->
+                    <!-- <header name='X-Originating-IP:' received='hotmail.com [' ordinal='0' /> -->
+                </source>
+
+                <white>
+                    <result code='1'/>
+                    <!-- <header name='Received:' ordinal='0' find='.friendlyhost.com'/> -->
+                </white>
+
+            </training>
+
+        </gbudb>
+
+        <rule-panics>
+            <!--
+            <rule id='123456'/>
+            <rule id='123457'/>
+            -->
+        </rule-panics>
+
+        <!-- Platform Specific Configuration -->
+        <platform>
+            <mdaemon>
+                <ip-test on-off='on'/>
+                <configurator command='start notepad' append-path='yes'/>
+            </mdaemon>
+        </platform>
+
+        <msg-file type='rfc822'/>
+
+    </node>
+</snf>
+

SNFMDaemonDLL/libsnfmdplugin.def

@@ -0,0 +1,6 @@
+EXPORTS
+    ConfigFunc@4 @1
+    MessageFunc@8 @2
+    MessageIPFunc@8 @3
+    Shutdown@4 @4
+    Startup@4 @5

SNFMDaemonDLL/main.cpp

@@ -0,0 +1,487 @@
+// main.cpp
+// SNF MDaemon Plugin
+// Copyright (C) 2007-2008, ARM Research Labs, LLC.
+
+#include <windows.h>
+#include "mdconfiguration.hpp"
+#include "../SNF_Service/SNFMulti.hpp"
+#define DLL_EXPORT __declspec(dllexport)
+
+////////////////////////////////////////////////////////////////////////////////
+// Constants And Tweaks
+////////////////////////////////////////////////////////////////////////////////
+
+const int MDPLUGIN_MSG = 22000;
+const int MDPLUGIN_DISPLAY = 22001;
+
+const char* PLUGIN_VERSION_INFO = "SNF MDaemon Plugin Version 3.0 Build: " __DATE__ " " __TIME__;
+
+////////////////////////////////////////////////////////////////////////////////
+// SNF MDaemon Plugin DLL Interface Setup.
+////////////////////////////////////////////////////////////////////////////////
+
+extern "C" {                                                                    // All of these "C" functions for export.
+
+  BOOL WINAPI DllMain ( HINSTANCE hInst, DWORD wDataSeg, LPVOID lpvReserved );  // The DllMain starup/shutdown function.
+
+  DLL_EXPORT void _stdcall Startup(HWND Parent);                                // Startup Function.
+  DLL_EXPORT void _stdcall ConfigFunc(HWND Parent);                             // Configuration function.
+  DLL_EXPORT void _stdcall MessageFunc(HWND Parent, const char* File);          // Message Scan Function.
+  DLL_EXPORT void _stdcall MessageIPFunc(HWND Parent, const char* File);        // IP Scan Function.
+  DLL_EXPORT void _stdcall Shutdown(HWND Parent);                               // Shutdown Function.
+
+}
+
+BOOL WINAPI DllMain(HINSTANCE hinstDLL, DWORD fdwReason, LPVOID lpvReserved) {  // Thread attach/detach functions.
+    switch (fdwReason) {                                                        // Switch on the reason for the call.
+        case DLL_PROCESS_ATTACH:                                                // Attach to process.
+            /*** Startup function moved to API ***/
+            return true;                                                        // We will assume it worked.
+            break;
+
+        case DLL_PROCESS_DETACH:                                                // Detach from process.
+            /*** Shutdown function moved to API ***/
+            return true;                                                        // We will assume that worked.
+            break;
+
+        case DLL_THREAD_ATTACH:                                                 // Attach to thread
+            break;                                                              // Just be happy.
+
+        case DLL_THREAD_DETACH:                                                 // Detach from thread
+            break;                                                              // Just be happy.
+    }
+    return true;                                                                // Be happy by default.
+}
+
+////////////////////////////////////////////////////////////////////////////////
+// SNF MDaemon Plugin Engine Code
+////////////////////////////////////////////////////////////////////////////////
+
+// Handy Debug Functions. This is how we can display critical events on screen
+// and emit entries into the MDaemon logs.
+
+HWND LatestParent = 0;                                                          // Handle MDaemon log operations.
+
+void sayToScreen(const string StuffToSay) {                                     // Display a modal system message.
+
+  MessageBox (                                                                  // Use a message box.
+    GetFocus(),                                                                 // Take the user's focus.
+    StuffToSay.c_str(),                                                         // This is what to say.
+    "Message Sniffer Plug-In",                                                  // This is how to title the box.
+    MB_OK|MB_SYSTEMMODAL );                                                     // This makes it modal with a button.
+}
+
+void sayToLog(const string Msg) {                                               // Emit message into MDaemon log.
+
+  if(0 != LatestParent) {                                                       // If we have a handle:
+
+    COPYDATASTRUCT Packet;                                                      // Create a packet for the log.
+    Packet.dwData = MDPLUGIN_DISPLAY;
+    Packet.cbData = Msg.length();
+    Packet.lpData = reinterpret_cast<void*>(
+                      const_cast<char*>(Msg.c_str()));
+
+    SendMessage(LatestParent, MDPLUGIN_MSG, MDPLUGIN_DISPLAY,                   // Send the packet.
+               (LPARAM)(PCOPYDATASTRUCT)&Packet);
+  }
+}
+
+// The configuration file path is theoretically in a fixed location based on
+// the installation directory of MDaemon. We read the installation directory
+// from the registry and derive the path from that. If we get what we want
+// then we return the full path to the SNFMDPlugin.xml file - which is derived
+// from snf_engine.xml. If we don't get what we want then we return nothing.
+
+string ConfigurationFilePath() {                                                // Get the config file path.
+    char data[256];                                                             // Create a buffer.
+    DWORD dwType = 0;                                                           // Type holder.
+    DWORD dwCount = sizeof(data);                                               // Data counter.
+    HKEY rkey;                                                                  // Key handle.
+
+    string KeyLocation("SOFTWARE\\Alt-N Technologies\\MDaemon");                // Key location.
+    string KeyValueName("AppPath");                                             // Value name.
+
+    // Open the key and if successful read it's value.
+
+    string ReadValue = "";                                                      // We'll put the answer here.
+
+	if(ERROR_SUCCESS ==                                                         // Try to open the registry
+	  RegOpenKeyEx(HKEY_LOCAL_MACHINE, KeyLocation.c_str(), 0, KEY_READ, &rkey)
+      ) {                                                                       // If it opened successfully:
+
+        RegQueryValueEx(                                                        // Read the MDaemon AppPath key.
+          rkey,
+          KeyValueName.c_str(),
+          NULL,
+          &dwType,
+          (LPBYTE)&data,
+          &dwCount
+        );
+
+        ReadValue = data;                                                       // Convert the results to a string.
+        RegCloseKey(rkey);                                                      // Close the registry key.
+
+        // Now we must convert the APP path to our SNFMDPlugin path.
+
+        int PathEnd = ReadValue.length();                                       // Grab the length.
+        if(PathEnd > 0) { ReadValue.erase(PathEnd-1,1); }                       // Eat the stroke at the end.
+        PathEnd = ReadValue.find_last_of("\\");                                 // Find the next stroke in.
+        int PathLength = ReadValue.length();                                    // Grab the path length.
+        int EraseSpan = PathLength - (PathEnd+1);                               // Calculate the amount to erase.
+        ReadValue.erase(PathEnd+1,EraseSpan);                                   // Erase it to get the root path.
+        ReadValue.append("SNF\\SNFMDPlugin.xml");
+
+	}
+    // Return either the empty string or the configuration file path.
+    return ReadValue;                                                           // Return what we have.
+}
+
+// Here are out engine components, startup, and shutdown logic. The actual
+// engine components are built as the DLL is loaded. They are "lit up" by the
+// startup() function - which is called when an application attaches to this
+// DLL; and they are closed down when an application detaches from this DLL.
+
+// 20080311 _M Added configuration interpreter for <platform/> and linked it
+// to the ConfigFunc() and MessageIPFunc() functions.
+
+volatile bool EngineIsGood = false;                                             // True when things are ready to go.
+snf_RulebaseHandler* Rulebase = 0;                                              // Our Rulebase Handler.
+snf_EngineHandler* ScanEngine = 0;                                              // Our Scan Engine.
+int Generation = -1;                                                            // Configuration generation tag.
+string Configuration;                                                           // Configuration file path.
+MDConfiguration* PlatformConfig = 0;                                            // Platform config interpreter.
+
+DLL_EXPORT void _stdcall Startup(HWND Parent) {                                 // How to get all this started.
+    LatestParent = Parent;
+    EngineIsGood = false;                                                       // Start off pessimistically.
+    try {                                                                       // Be sure to catch any exceptions.
+        Rulebase =  new snf_RulebaseHandler();                                  // Create our rulebase handler.
+        ScanEngine = new snf_EngineHandler();                                   // Create our engine scanner.
+        Configuration = ConfigurationFilePath();                                // Get the configuration path.
+        PlatformConfig = new MDConfiguration(*Rulebase, Configuration);         // Set up our configuration monitor.
+        Rulebase->open(Configuration.c_str(), "", "");                          // Open a configured rulebase.
+        Rulebase->PlatformVersion(PLUGIN_VERSION_INFO);                         // Set the Platform version string.
+        ScanEngine->open(Rulebase);                                             // Open the scanning engine.
+        EngineIsGood = true;                                                    // If all went well, we're up!
+        sayToLog(Rulebase->EngineVersion());                                    // version info to show we're ok.
+        sayToLog(Rulebase->PlatformVersion());                                  // Log our platform and engine
+        string ConfigInfo = "SNF Config: ";                                     // Build a configuration info
+        ConfigInfo.append(Configuration);                                       // message and display that
+        sayToLog(ConfigInfo);                                                   // too.
+    }
+    catch(snf_RulebaseHandler::ConfigurationError) {                            // Can't work with config file!
+        string ErrorMessage = "Unable to Configure with: ";                     // Tell them about it and give
+        ErrorMessage.append(Configuration);                                     // them a hint where we looked.
+        sayToScreen(ErrorMessage);
+    }
+    catch(snf_RulebaseHandler::FileError) {                                     // Can't load the rulebase file!
+        string ErrorMessage = "Unable to Load Rulebase in: ";                   // Tell them about it and give
+        ErrorMessage.append(Configuration);                                     // them a hint where we looked.
+        sayToScreen(ErrorMessage);
+    }
+    catch(snf_RulebaseHandler::AllocationError) {                               // Can't allocate memory!
+        sayToScreen("Unable to Allocate Enough Memory!");                       // Tell them about it.
+    }
+    catch(snf_RulebaseHandler::IgnoreListError) {                               // Can't load ignore list!
+        sayToScreen("Unable to Load Ingore List!");                             // Tell them about it.
+    }
+    catch(snf_RulebaseHandler::AuthenticationError) {                           // Can't authenticate!
+        sayToScreen("Unable to Authenticate Rulebase!");                        // Tell them about it.
+    }
+    catch(snf_RulebaseHandler::Busy) {                                          // Busy?!! That's weird.
+        sayToScreen("Busy Exception?!!");                                       // Tell them about it.
+    }
+    catch(snf_RulebaseHandler::Panic) {                                         // Panic?!! That's weird.
+        sayToScreen("Panic Exception?!!");                                      // Tell them about it.
+    }
+    catch(exception& e) {                                                       // Some other runtime error?
+        sayToScreen(e.what());                                                  // Tell them what it was.
+    }
+    catch(...) {                                                                // Catch the unknown exception.
+        sayToScreen("Unexpected Exception!");                                   // Tell them things didn't work.
+    }
+
+    return;                                                                     // All done.
+}
+
+/****** THE FOLLOWING IS DEFUNCT, BUT USEFUL INFO SO WE KEEP IT! ******/
+/**** *Note: Why do we always return true even when we fail???
+***** Because, in a DLL that is being loaded, none of the threads that
+***** get created in the rulebase object will get any cycles until the
+***** DLL load sequence is complete _AND_SUCCESSFUL_!
+*****
+***** The same is true when we return false -- because then the OS KNOWS
+***** that it's not safe to run any of the threads we've created.
+*****
+***** As a result, if we try to destroy our rulebase manager after an
+***** unsuccessful load then all of the stop() calls to our threads will
+***** block waiting for the initialized threads to see their stop bits and
+***** end. Since none of these threads actually get any love until the
+***** DLL is successfully loaded, we end up waiting happily for ever!
+*****
+***** Instead of stepping into this world of hurt, we've decided to leave
+***** the internal flag set to indicate that the engine is Not-Good so that
+***** the scanning functions remain inert, and then we wait patiently for
+***** the DLL to be unloaded.
+*****
+***** When that happens, since the OS KNOWS the DLL was loaded happily
+***** before, the objects can go through their normal destruction without
+***** deadlocking on their stop() functions (join()).
+****/
+
+DLL_EXPORT void _stdcall Shutdown(HWND Parent) {                                // How to get all this stopped.
+    LatestParent = Parent;
+    if(EngineIsGood) {                                                          // If the engine is good:
+        try {
+            EngineIsGood = false;                                               // Stop using the engine now.
+            LatestParent = 0;                                                   // No more logging calls.
+            if(ScanEngine) {                                                    // Close the scanner if it exists:
+                ScanEngine->close();                                            // Close it.
+                delete ScanEngine;                                              // Delete it.
+                ScanEngine = 0;                                                 // Forget it.
+            }
+            if(Rulebase) {                                                      // Close the rulebase if it exists.
+                Rulebase->close();                                              // Close it.
+                delete Rulebase;                                                // Delete it.
+                Rulebase = 0;                                                   // Forget it.
+            }
+            if(PlatformConfig) {                                                // Drop the PlatformConfig if it be.
+                delete PlatformConfig;                                          // Delete it.
+                PlatformConfig = 0;                                             // Forget it.
+            }
+            Generation = -1;                                                    // Reset our config gen tag.
+            sayToLog("SNF: Plugin Shutdown.");                                  // Tell them we're shut down.
+        }
+        catch(exception& e) {                                                   // If we have a runtime exception
+            string InShutdown = "SNF, Shutdown: ";                              // make a human friendly message
+            InShutdown.append(e.what());                                        // and package the exception for
+            sayToScreen(InShutdown);                                            // a screen pop-up.
+        }
+        catch(...) {                                                            // If we see some other kind of
+            sayToScreen("SNF, Shutdown: Unknown Exception");                    // exception then show that.
+        }
+    }
+    return;                                                                     // All done.
+}
+
+// Now we get to the business end of the plugin. Three functions are exported.
+// ConfigFunc() launches an editor for the configuration file.
+
+// 20080311 _M Adjusted ConfigFunc to use Platform Configuration Parameters.
+
+DLL_EXPORT void _stdcall ConfigFunc(HWND Parent) {                              // Configuration function.
+    LatestParent = Parent;                                                      // Capture the parent for logging.
+    string ConfiguratorString = PlatformConfig->ConfiguratorCommand();          // Get Configurator launch command.
+    if(0 < ConfiguratorString.length()) system(ConfiguratorString.c_str());     // If we have a launch command use it.
+}
+
+// MessageFunc() scans a message file and injects headers.
+
+DLL_EXPORT void _stdcall MessageFunc(HWND Parent, const char* File) {           // Message Scan Function.
+    LatestParent = Parent;                                                      // Capture the parent for logging.
+    string LogMessage = "SNF MessageScan: ";                                    // Start a plugin log entry.
+    LogMessage.append(File);                                                    // add the file name.
+
+    if(false == EngineIsGood) {                                                 // If the engine is not up then
+        LogMessage.append(", Engine Not Ready!");                               // report that in the plug-in log.
+        sayToLog(LogMessage);                                                   // Post our entry to the plug-in log.
+        return;                                                                 // We're done.
+    }
+
+    // We are ready to begin our scan.
+
+    int ResultCode = 0;                                                         // Keep track of the scan result.
+
+    try {                                                                       // Be sure to catch any exceptions.
+        ResultCode = ScanEngine->scanMessageFile(File);
+    }
+    catch(snf_EngineHandler::FileError& e) {                                    // Exception when a file won't open.
+        LogMessage.append(", File Error!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(snf_EngineHandler::XHDRError& e) {                                    // Exception when XHDR Inject/File fails.
+        LogMessage.append(", X-Header Error!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(snf_EngineHandler::BadMatrix& e) {                                    // Exception out of bounds of matrix.
+        LogMessage.append(", Bad Matrix!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(snf_EngineHandler::MaxEvals& e) {                                     // Exception too many evaluators.
+        LogMessage.append(", Too Many Evaluators!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(snf_EngineHandler::AllocationError& e) {                              // Exception when we can't allocate something.
+        LogMessage.append(", Allocation Error!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(snf_EngineHandler::Busy& e) {                                         // Exception when there is a collision.
+        LogMessage.append(", Engine Busy!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(snf_EngineHandler::Panic& e) {                                        // Exception when something else happens.
+        LogMessage.append(", Engine Panic!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(exception& e) {                                                       // Some unexpected exception.
+        LogMessage.append(", Unexpected Exception!");
+        sayToLog(LogMessage);
+        string DebugData = "SNF Debug: ";
+        DebugData.append(e.what());
+        sayToLog(DebugData);
+        return;
+    }
+    catch(...) {                                                                // We should never get one of these, but
+        LogMessage.append(", Non-Std Exception!");                              // if we do we have something to say.
+        sayToLog(LogMessage);
+        return;
+    }
+
+    // At this point we know our scan worked ok. So, let's post the result.
+
+    ostringstream O;                                                            // A stringstream makes it easy to
+    O << LogMessage << ", Result=" << ResultCode;                               // format our plug-in log entry.
+    sayToLog(O.str());                                                          // Then we post it to the plug-in log.
+}
+
+// ControlFilePath(MessageFilePath) Converts .msg path to .ctl path.
+
+string ControlFilePath(string MessageFilePath) {                                // Convert .msg/.tmp to .ctl path.
+    const string ControlFileExt(".ctl");                                        // Control file extension.
+    const string EmptyString("");                                               // The empty string.
+    string ControlFilePath(MessageFilePath);                                    // Start with the message path.
+    string::size_type CFExtPosition = ControlFilePath.find_last_of('.');        // Find the extension.
+    if(string::npos == CFExtPosition) return EmptyString;                       // If we didn't find it return ""
+    ControlFilePath.replace(                                                    // Replace the message file
+      CFExtPosition, ControlFileExt.length(),                                   // extension with the control
+      ControlFileExt                                                            // file extension.
+    );
+    return ControlFilePath;
+}
+
+// MessageIPFunc() looks at the control file for a message, extracts the
+// source IP, and deletes the message if the IP is in the truncate range.
+
+DLL_EXPORT void _stdcall MessageIPFunc(HWND Parent, const char* File) {         // IP Scan Function.
+    LatestParent = Parent;                                                      // Capture the parent for logging.
+    if(false == PlatformConfig->MessageIPFuncOn()) {                            // If the IP func is off:
+        return;                                                                 // We're done.
+    }
+
+    string LogMessage = "SNF IPScan: ";                                         // Start a plugin log entry.
+    LogMessage.append(File);                                                    // add the file name.
+
+    if(false == EngineIsGood) {                                                 // If the engine is not up then
+        LogMessage.append(", Engine Not Ready!");                               // report that in the plug-in log.
+        sayToLog(LogMessage);                                                   // Post our entry to the plug-in log.
+        return;                                                                 // We're done.
+    }
+
+    // Open the control file and find the RemoteIP
+
+    const string CtlRemoteIP("RemoteIP=");                                      // This is what we're looking for.
+    string RemoteIP = "";                                                       // This is where it will go.
+    try {                                                                       // Do this safely.
+        ifstream ControlFile(ControlFilePath(File).c_str());                    // Open the control file.
+        while(ControlFile) {                                                    // While the file is good...
+            string Line;                                                        // Read one line at a time
+            getline(ControlFile, Line);                                         // into a string.
+            string::size_type TagPos = Line.find(CtlRemoteIP);                  // Look for the RemoteIP tag.
+            if(string::npos != TagPos) {                                        // If we find the RemoteIP tag:
+                RemoteIP = Line.substr(TagPos + CtlRemoteIP.length());          // Get the string after the tag
+                break;                                                          // We're done with the ctl file!
+            }
+        }
+        ControlFile.close();                                                    // Be nice and close our file.
+    }
+    catch(...) {}                                                               // Eat any exceptions.
+
+    if(0 == RemoteIP.length()) {                                                // If we didn't get the IP then
+        LogMessage.append(", Didn't Get Remote IP!");                           // make that the rest of our log
+        sayToLog(LogMessage);                                                   // entry and post it.
+        return;                                                                 // We're done.
+    }
+
+    // At this point we have the remote IP to check.
+
+    LogMessage.append(", "); LogMessage.append(RemoteIP);                       // Add the IP to the log entry.
+    IPTestRecord IPAnalysis(RemoteIP);                                          // Set up a test record.
+
+    try {                                                                       // Safely,
+        Rulebase->performIPTest(IPAnalysis);                                    // check the IP w/ GBUdb.
+    }
+    catch(...) {                                                                // If we encountered a problem
+        LogMessage.append(", Analysis Failed!");                                // then we need to report that
+        sayToLog(LogMessage);                                                   // our analysis failed.
+        return;                                                                 // We're done.
+    }
+
+    // At this point we've got a good analysis, so we take action (if needed)
+    // and produce a helpful log entry.
+
+    ostringstream Happy;                                                        // A stringstream for easy formatting.
+    Happy << LogMessage << ", {";                                               // Start the analysis report.
+
+    switch(IPAnalysis.G.Flag()) {                                               // Identify the flag data for this IP.
+        case Good: Happy << "Good, "; break;
+        case Bad:  Happy << "Bad, "; break;
+        case Ugly: Happy << "Ugly, "; break;
+        case Ignore: Happy << "Ignore, "; break;
+    }
+
+    Happy << "p=" << IPAnalysis.G.Probability() << ", "                         // Probability and Confidence.
+          << "c=" << IPAnalysis.G.Confidence() << ", ";
+
+    switch(IPAnalysis.R) {                                                      // The Range analysis.
+        case Unknown:   { Happy << " Unknown}"; break; }                        // Unknown - not defined.
+        case White:     { Happy << " White}"; break; }                          // This is a good guy.
+        case Normal:    { Happy << " Normal}"; break; }                         // Benefit of the doubt.
+        case New:       { Happy << " New}"; break; }                            // It is new to us.
+        case Caution:   { Happy << " Caution}"; break; }                        // This is suspicious.
+        case Black:     { Happy << " Black}"; break; }                          // This is bad.
+        case Truncate:  { Happy << " Truncate}"; break; }                       // This is bad unless we ignore it.
+    }
+
+    string WhatWeDid;                                                           // So, what do we do?
+    if(                                                                         // Are we in Truncate land?
+      (Truncate == IPAnalysis.R && Ugly == IPAnalysis.G.Flag()) ||              // If the IP is Truncate & Ugly, or
+      Bad == IPAnalysis.G.Flag()                                                // If the IP is just plain bad then
+      ) {                                                                       // we are in truncate land so we
+        Happy << " Rejected!"; WhatWeDid = "Rejected";                          // mark the message Rejected! and
+        remove(File);                                                           // remove the file to reject it!
+    } else {                                                                    // If we are not rejecting the
+        Happy << " Allowed."; WhatWeDid = "Allowed";                            // message tell them it's allowed.
+    }
+
+    Rulebase->logThisIPTest(IPAnalysis, WhatWeDid);                             // Log the event.
+
+    sayToLog(Happy.str());                                                      // Post to the plug-in log.
+}

SNFMDaemonDLL/mdconfiguration.cpp

@@ -0,0 +1,68 @@
+// mdconfiguration.cpp
+// SNF MDaemon Plugin: Platform Configuration Module
+// Copyright (C) 2007-2008, ARM Research Labs, LLC.
+
+#include "mdconfiguration.hpp"
+
+MDConfiguration::MDConfiguration(snf_RulebaseHandler& R, string& C) :           // Default constructor.
+  MyCFGReader("mdaemon"),                                                       // The top element is "mdaemon"
+  MyGeneration(-1),                                                             // Our first real gen will be 0.
+  MyMessageIPFuncOn(true),                                                      // By default the IP func is on.
+  MyConfiguratorCommand("start notepad"),                                       // By default we start notepad to
+  MyAppendConfigurationFileOn(true),                                            // edit our config and pass it the path.
+  MyConfigurationPath(C),                                                       // This is the config file path.
+  MyRulebase(R) {                                                               // This is the rulebase manager.
+
+  // Here we construct the configuration elements that will parse the platform
+  // configuration data from our rulebase manager.
+
+    MyCFGReader
+        .Element("ip-test")
+            .Attribute("on-off", MyMessageIPFuncOn, false)
+        .End("ip-test")
+        .Element("configurator")
+            .Attribute("command", MyConfiguratorCommand, "")
+            .Attribute("append-path", MyAppendConfigurationFileOn, true)
+        .End("configurator")
+    .End("mdaemon");
+}
+
+int MDConfiguration::Generation() {                                             // When checking our generation we
+    return MyGeneration;                                                        // need only return what we have.
+}
+
+bool MDConfiguration::MessageIPFuncOn() {                                       // Are we using the MessageIP function?
+    ScopeMutex EverybodyFreeze(MyMutex);                                        // Freeze the mutex.
+    updateConfig();                                                             // Update the configuration if needed.
+    return MyMessageIPFuncOn;                                                   // Return the IP Func On/Off value.
+}
+
+string MDConfiguration::ConfiguratorCommand() {                                 // Return proper configurator command.
+    ScopeMutex EverybodyFreeze(MyMutex);                                        // Freeze the mutex.
+    updateConfig();                                                             // Update the configuration.
+    string ConfiguratorCommandString = "";                                      // Keep this in scope.
+    if(0 < MyConfiguratorCommand.length()) {                                    // If we have a command configured:
+        ConfiguratorCommandString = MyConfiguratorCommand;                      // capture that command.
+        if(MyAppendConfigurationFileOn) {                                       // If we are supposed to append the
+            ConfiguratorCommandString.append(" ");                              // configuration file path then
+            ConfiguratorCommandString.append(MyConfigurationPath);              // tack that on the end.
+        }                                                                       // If the configure command string was
+    }                                                                           // configured empty we will return "".
+    return ConfiguratorCommandString;                                           // Send back what we got.
+}
+
+void MDConfiguration::updateConfig() {                                          // Parse & update the config if needed.
+    if(MyGeneration != MyRulebase.Generation()) {                               // If our config is out of sync:
+        try {                                                                   // Catch any parsing errors.
+            string NewConfiguration = MyRulebase.PlatformConfiguration();       // Grab the configuration string.
+            ConfigurationData MyConfigData(                                     // Load the configuration string
+              NewConfiguration.c_str(), NewConfiguration.length());             // into a configuration data object.
+            MyCFGReader.initialize();                                           // Initialize the parser and
+            MyCFGReader.interpret(MyConfigData);                                // feed it the object.
+            MyGeneration = MyRulebase.Generation();                             // Grab the new generation tag.
+        }
+        catch(...) { }                                                          // Eat any thrown exceptions.
+    }                                                                           // If we're in sync we don't budge.
+}
+
+

SNFMDaemonDLL/mdconfiguration.hpp

@@ -0,0 +1,47 @@
+// mdconfiguration.hpp
+// SNF MDaemon Plugin: Platform Configuration Module
+// Copyright (C) 2007-2008, ARM Research Labs, LLC.
+
+// This module handles the platform specific configuration for the MDaemon
+// plugin. The rulebase is passed to the object when constructed. Each call to
+// get a parameter from the object causes a quick check to the generation data.
+// If the generation is still valid then the data is provided as is. If not then
+// the configuration is updated before it is returned. All of this is protected
+// by a mutex.
+
+#ifndef included_mdconfiguration_hpp
+#define included_mdconfiguration_hpp
+
+#include <windows.h>
+#include "../SNF_Service/SNFMulti.hpp"
+#include "../SNF_Service/configuration.hpp"
+#include "../SNF_Service/threading.hpp"
+
+class MDConfiguration {
+  private:
+
+    Mutex MyMutex;                                                              // Protects configuration.
+    ConfigurationElement MyCFGReader;                                           // This is how we read our cfg data.
+
+    string& MyConfigurationPath;                                                // Configuration file path.
+    snf_RulebaseHandler& MyRulebase;                                            // Rulebase manager at startup.
+
+    volatile int MyGeneration;                                                  // Numeric Generation Tag.
+    bool MyMessageIPFuncOn;                                                     // Message IP test on/off switch.
+    string MyConfiguratorCommand;                                               // Config editor command string.
+    bool MyAppendConfigurationFileOn;                                           // Append config file path to command?
+
+    void updateConfig();                                                        // Update config if needed.
+
+  public:
+
+    MDConfiguration(snf_RulebaseHandler& R, string& C);                         // Default constructor.
+
+    int Generation();                                                           // Numeric generation tag.
+    bool MessageIPFuncOn();                                                     // Message IP test on/off switch.
+    string ConfiguratorCommand();                                               // Configure function command string.
+
+};
+
+#endif
+