SNFMulti/GBUdb.hpp

// GBUdb.hpp
//
// (C) Copyright 2006 - 2009 ARM Research Labs, LLC
// See www.armresearch.com for the copyright terms.
//
// Good, Bad, Ugly, Ignore IP database engine.

////////////////////////////////////////////////////////////////////////////////
// Include M_GBUdb Only Once

#ifndef M_GBUdb
#define M_GBUdb

#include "../CodeDweller/faults.hpp"
#include "../CodeDweller/threading.hpp"
#include <cmath>
#include <cctype>
#include <string>
#include <sstream>
#include <list>
#include <cstdlib>

using namespace std;

const unsigned int GBUdbFlagsMask = 0xC0000000;                                 // Top 2 bits are the flag.
const unsigned int GBUdbIgnore = 0xC0000000;                                    // Ignore is the 11 flag.
const unsigned int GBUdbUgly = 0x00000000;                                      // Ugly/Unknown is the 00 flag.
const unsigned int GBUdbGood = 0x80000000;                                      // Good is the 10 flag.
const unsigned int GBUdbBad = 0x40000000;                                       // Bad is the 01 flag.
const unsigned int GBUdbGoodMask = 0x3FFF8000;                                  // The good count is masked in this range.
const unsigned int GBUdbBadMask = 0x00007FFF;                                   // Tha bad count is masked here.
const unsigned int GBUdbLimit = GBUdbBadMask;                                   // When a count hits this, normalize in half.
const unsigned int GBUdbGoodShift = 15;                                         // Shift good counts this many bits.

const unsigned int GBUdbMatchEntryBit = 0x80000000;                             // Match entry Index bit.
const unsigned int GBUdbMatchUnusedBit = 0x40000000;                            // Unalocated Match entry Index bit.
const unsigned int GBUdbMatchDataMask = 0x3fffffff;                             // IP Match data mask.

enum GBUdbFlag {                                                                // A type for the GBUdb flag.
    Ignore = GBUdbIgnore,                                                       // Ignore
    Ugly = GBUdbUgly,                                                           // Ugly
    Good = GBUdbGood,                                                           // Good
    Bad = GBUdbBad                                                              // Bad
};

//// GBUdbLocking semantics
//// When doForAllRecords() is called at the GBUdb level, we need to know how
//// the GBUdb mutex should be handled.

enum GBUdbLocking {                                                             // A type that describes locking semantics.
    Dataset,                                                                    // Lock the through the entire operation.
    Record,                                                                     // Lock and unlock for each record.
    None                                                                        // Do not lock.
};

typedef unsigned int GBUdbIndex;                                                // A type for Index values from records.
const GBUdbIndex GBUdbUnknown = 0x00000000;                                     // The unknown address.

const int GBUdbRecordsPerNode = 256;                                            // Records per node.
const int GBUdbDefaultGrowNodes = 8192;                                         // Default Nodes to grow.
const int GBUdbDefaultArraySize = GBUdbRecordsPerNode * GBUdbDefaultGrowNodes;  // Default initial Array size.
const int GBUdbRootNodeOffset = 256;                                            // First indexing node after node 0.
const int GBUdbGrowthThreshold = 4;                                             // Time to grow at this # free nodes.

//// Node 0 is the go-nowhere node for when things fall off the index so it
//// is coded to all GBUdbUnknown.

//// The last node in the array is used for global statistics & allocation
//// tables.

const int GBUdbControlNodeOffset = -256;                                        // Offset from end of data for control node.
const int GBUdbNextFreeNodeOffset = GBUdbControlNodeOffset + 0;                 // Offset for next free node index.
const int GBUdbMatchListOffset = GBUdbControlNodeOffset +1;                     // Offset for Match record allocation root.
const int GBUdbIPCountOffset = GBUdbControlNodeOffset + 2;                      // Offset for count of IPs in GBUdb.

// GBUdbRecord converts an ordinary unsigned long integer into a wealth of
// useful information just by adding a collection of useful tools.

class GBUdbRecord {                                                             // A GBUdb record is really just a
  public:                                                                       // long integer, but it can be interpreted
                                                                                // lots of ways.
    unsigned int RawData;                                                       // The raw unsigned int goes here.

    GBUdbRecord();                                                              // Initialize to zero.

    GBUdbFlag Flag();                                                           // This returns the flag.
    GBUdbFlag Flag(GBUdbFlag f);                                                // This sets and returns the flag.
    unsigned int Good();                                                        // This returns the good count.
    unsigned int Good(unsigned int g);                                          // This sets and returns the good count.
    unsigned int Bad();                                                         // This returns the bad count.
    unsigned int Bad(unsigned int b);                                           // This sets and returns the bad count.
    unsigned int addGood(unsigned int g = 1);                                   // This increments the good count.
    unsigned int addBad(unsigned int b = 1);                                    // This increments the bad count.
    GBUdbRecord& integrate(GBUdbRecord& A, int LocalWeight, int RemoteWeight);  // This integrates another record.

    GBUdbIndex Index();                                                         // This returns the record as an Index.
    GBUdbIndex Index(GBUdbIndex i);                                             // This sets the record as an index.

    double Probability();                                                       // Return +(bad) or -(good) probability.
    double Confidence();                                                        // Return the confidence based on samples.
};

// Special events need to be recorded. For that job we have GBUdbAlerts

const int UTCBufferSize = 16;                                                   // C string buffer size for UTC stamp.

class GBUdbAlert {
  public:
    GBUdbAlert();                                                               // Constructor sets timestamp & nulls.
    char UTC[UTCBufferSize];                                                    // Time stamp for this alert.
    unsigned int IP;                                                            // IP for this alert.
    GBUdbRecord R;                                                              // GBUdbRecord for this alert.
    string toXML();                                                             // Convert to an xml representation.
};

// Mass update kinds of operations are handled by providing a functor
// of the type GBUdbOperator to the method doForAllRecords(). The functor is
// called with every record in the GBUdb.

//// Here is the virtual GBUdb Operator class.

class GBUdbOperator {
  public:
    virtual GBUdbRecord& operator()(unsigned int IP, GBUdbRecord& R) = 0;
};

// GBUdbDataset manages a large array of GBUdb records and nodes. Nodes are
// simulated data structures -- essentially arrays of GBUdbRecords that are
// interpreted as Indexes so that each byte of a particular IP can be used
// to follow the index through the tree to the final record that actually
// represents the IPs data.

// The last few records in the array are used to keep track of some basic
// statistics including where the next node will come from. As with the GBUdb
// record itself, it's all in how the data is interpreted. Using this strategy
// of converting plain-old integers into various data types on the fly allows
// us to allocate the entire structure as a single block and avoid much
// page swapping behind the scenes.

class GBUdbDataset {
  private:
    GBUdbRecord* DataArray;                                                     // Array of GBUdbRecords, nodes, etc.
    int MyArraySize;                                                            // The size of the array in records.
    string MyFileName;                                                          // CString for the file name.

    GBUdbIndex ixIPCount();                                                     // Index of the IP count for this db.
    GBUdbIndex ixNextFreeNode();                                                // Index of the Next Free Node Index.
    GBUdbIndex ixMatchListRoot();                                               // Index of the Match List Root Index.
    GBUdbIndex newMatchRecord(unsigned int IP);                                 // Allocate a new Match record for IP.
    GBUdbIndex newMatchNodeRoot();                                              // Allocate a new Match node.
    GBUdbIndex newNodeRoot();                                                   // Allocates a new node, returns offset.
    void deleteMatchAt(GBUdbIndex I);                                           // Recall match record at I for reuse.

     // invokeAt() Handles invocation at each node/octet using and managing MatchRecords as needed.

    GBUdbIndex invokeAt(GBUdbRecord& R, unsigned int IP, int Octet, bool ExtendMatches);

    int increaseIPCount();                                                      // When we add an IP to the db.
    int decreaseIPCount();                                                      // When we drop an IP from the db.

    void increaseIPCountIfNew(GBUdbRecord& R);                                  // If R is GBUdbUnknown, IncreaseIPCount.

    bool isMatch(GBUdbIndex I);                                                 // True if record at I is a match record.
    bool isMatch(GBUdbIndex I, unsigned int IP);                                // True if record at I is a match for IP.
    GBUdbRecord& MatchedData(GBUdbIndex I);                                     // Returns the data for the match at I.
    unsigned int EncodedMatch(unsigned int IP);                                 // Returns encoded raw dat for a Match.

    //// In order to support binmodal indexing we must make sure that
    //// no octet3 data is mapped to the root record in an octet3 node. If
    //// it were so mapped then an octet2 evaluation might misinterpret the
    //// GBUdbFlag fields as a MatchRecord indicator and cause the data to
    //// become corrupted. To solve this problem, any time an octet2 node
    //// maps to an octet3 node and NOT a MatchRecord, the 0 record in the
    //// octet3 node must have no flags. Since x.x.x.0 is presumed to be the
    //// network address, and x.x.x.255 is presumed to be a broadcast address
    //// we cause both to map to a single record (the 255 record) where the
    //// Class C, B, or A data can be recorded and modified in safety. Since
    //// there is no need to track the brodcast and network address cases.
    //// separately there is no inherent conflict in this approach. The
    //// remapIP00toFF method performs this transform as needed in the
    //// readRecord() and invokeRecord() methods.

    unsigned int remapIP00toFF(unsigned int IP);                                // Remaps final octet 00 to FF if needed.

    GBUdbRecord MySafeUnknownRecord;                                            // Safe unknown record to return.
    GBUdbRecord& SafeUnknownRecord();                                           // Clears and returns the Safe record.

    // doForAllNodes does its job by launching a recursive search algorythm
    // which is embodied in doAllAtNode(). The doAllAtNode() method is called
    // for the root node by doForAllRecords and searches through the tree depth
    // first to locate each active record in the GBUdb and call the Operator.
    // updateWorkingIP() uses progressive input from eacn level to determine
    // the effective IP for the node under test.

    void updateWorkingIP(unsigned int& WIP, int OctetValue, int Level);
    void doAllAtNode(GBUdbIndex I, GBUdbOperator& O, int NodeLevel, unsigned int WorkingIP);

  public:
    ~GBUdbDataset();                                                            // Flush & shutdown a dataset.
    GBUdbDataset(const char* SetFileName);                                      // Create with a name or no name (NULL).
    GBUdbDataset(GBUdbDataset& Original);                                       // Copy constructor.

    class CouldNotGrow {};                                                      // Thrown when grow() fails.
    class NoFreeNodes {};                                                       // Thrown when newNodeRoot() fails.
    class MatchAllocationCorrupted {};                                          // Thrown when newMatchRecord() fails.

    GBUdbRecord& readRecord(unsigned int IP);                                   // Read only - find a GBUdb record.
    GBUdbRecord& invokeRecord(unsigned int IP);                                 // Create and/or Find a GBUdb record.
    bool dropRecord(unsigned int IP);                                           // Drop an IP record. (true if we did)

    int ArraySize();                                                            // Array size.
    int FreeNodes();                                                            // Number of free nodes remaining.
    int IPCount();                                                              // Number of IPs stored.

    const char* FileName(const char* NewName);                                  // Set new file name w/ cstring.
    const char* FileName();                                                     // Return the name.

    void grow(int HowManyNodes = GBUdbDefaultGrowNodes);                        // Grow (by number of nodes).
    void save();                                                                // Flush the dataset to disk.
    void load();                                                                // Read the dataset from disk.

    void doForAllRecords(GBUdbOperator& O);                                     // Calls O(IP, Record) W/ every record.

};

// The GBUdb ojbect manages access to the GBUdb. For example, it will grow the
// dataset when that is required, report new events, and generally serve as the
// main access point for a given GBUdb. It even serializes multiple threads.

//// Here is the actual GBUdb class.

class GBUdb {
  private:

    Mutex MyMutex;                                                              // Data sync mutex.
    Mutex AlertsMutex;                                                          // Mutex for the alerts list.
    GBUdbDataset* MyDataset;                                                    // Array of records.
    int PostsCounter;                                                           // Counts good/bad posts.

    list<GBUdbAlert> MyAlerts;                                                  // Allerts list.
    void recordAlertFor(unsigned int IP, GBUdbRecord& R, unsigned int C);       // Append an alert record if needed.

  public:

    GBUdb();                                                                    // Open/Create w/ no name.
    GBUdb(const char* FileName);                                                // Open/Create w/ cstring or NULL.
    ~GBUdb();                                                                   // Shutdown

    const char* FileName(const char* NewName);                                  // Set/Change the file name.
    const char* FileName();                                                     // Return the FileName.

    void save();                                                                // Save the data.
    void load();                                                                // Load the data.

    GBUdbRecord addGood(unsigned int IP, int i = 1);                            // Count an IP as good.
    GBUdbRecord addBad(unsigned int IP, int i = 1);                             // Count an IP as bad.

    GBUdbRecord setGood(unsigned int IP);                                       // Set the flag to Good for this IP.
    GBUdbRecord setBad(unsigned int IP);                                        // Set the flag to Bad for this IP.
    GBUdbRecord setUgly(unsigned int IP);                                       // Set the flag to Ugly for this IP.
    GBUdbRecord setIgnore(unsigned int IP);                                     // Set the flag to Ignore for this IP.

    bool dropRecord(unsigned int IP);                                           // Drop an IP record. (true if we did)

    GBUdbRecord getRecord(unsigned int IP);                                     // Retrieve an IP record.
    GBUdbRecord setRecord(unsigned int IP, GBUdbRecord& R);                     // Store an IP record.

    GBUdbRecord adjustCounts(unsigned int IP, GBUdbRecord& R);                  // Adds counts from R to record for IP.

    void doForAllRecords(GBUdbOperator& O, GBUdbLocking L = Dataset);           // Call the Operator w/ All records.
    void saveSnapshot();                                                        // Saves a snapshot of the current db.
    void reduce();                                                              // Reduce all counts by half.
    void compress();                                                            // Remove any unknown records (reduced to zero).

    int readIgnoreList(const char* FileName = "GBUdbIgnoreList.txt");           // setIgnore for a list of IPs

    void GetAlerts(list<GBUdbAlert>& ListToFill);                               // Get all current alerts & clear.
    void ImportAlerts(list<GBUdbAlert>& PeerAlerts);                            // Default log2 alert import function.

    int IPCount();                                                              // Number of IPs stored.
    int Size();                                                                 // Size of GBUdb in bytes.
    double Utilization();                                                       // Utilization (percent).
    int Posts();                                                                // Number of posts since last save.

};

//// Include inline method definitions /////////////////////////////////////////

#include "GBUdb.inline.hpp"

#endif

// End of GBUdb Include Only Once
////////////////////////////////////////////////////////////////////////////////