|
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570 |
- // snf_engine.hpp
- //
- // (C) 1985-2004 MicroNeil Research Corporation
- // (C) 2005-2009 ARM Research Labs, LLC.
- //
- // Derived from original work on cellular automation for complex pattern
- // reflex engine 1985 Pete McNeil (Madscientist)
- //
- // Derived from rapid scripting engine (token matrix) implementation 1987
- //
-
- // This is the header file for the sniffer pattern matching engine.
-
- // 20080305 _M - Added FlipEndian() function to convert rulebases from their
- // native little-endian format to big-endian format for CPUs that need it. See
- // additional work in SNFMulti to call the FlipEndian() function AFTER the
- // rulebase has been authenticated but before it is put into use.
-
- // 20070606 _M - Refactored exceptions to use base std::exception and improved
- // the evaluator code to reduce the strength of safety testing from 3 compares
- // per byte to 1.
-
- // 20060531 _M - Added evaluator caching to save a few cycles by not allocating
- // new memory and performing a complete initialization of an evaluator if there
- // is already one handy from a previous use.
-
- // 20021030 _M - Created.
-
- #ifndef _MN_SNF_ENGINE
- #define _MN_SNF_ENGINE
-
- #include <cassert>
- #include <stdexcept>
- #include <unistd.h>
- #include <cstdio>
- #include <cctype>
- #include <ctime>
- #include <cstdlib>
- #include <fstream>
- #include <iostream>
- #include <string>
- #include <exception>
- #include "../CodeDweller/faults.hpp"
- #include "../CodeDweller/mangler.hpp"
- //#include "../nvwa-0.6/nvwa/debug_new.h"
-
- using namespace std;
-
- // 20030929 _M SYMBOL_RANGE moved to snf_engine.hpp as part of augmenting the
- // capability of a match record. Match records now can decode themselves.
-
- const int SYMBOL_RANGE = 256; // Symbol result coding modulator.
-
- // Let's create our utility classes and structures.
-
- // The Token class.
- // This class represents the structure of a token. The rule file is, in fact,
- // a token matrix. Tokens within the matrix allow the sniffer to navigate through
- // a state change matrix attempting to locate special positions that indicate the
- // termination of a path, or more specifically, the recognition of a string that
- // has been evaluated along that path.
- //
- // IT IS IMPORTANT TO NOTE THAT AS THESE PROGRAMS ARE WRITTEN IT ASSUMES WE ARE IN
- // A 32 BIT INTEL ENVIRONMENT SO THAT THE TOKEN MATRIX CAN BE LOADED IN A SINGLE PASS
- // USING A BINARY INPUT STREAM.
-
- ////////////////////////////////////////////////////////////////////////////////////////
- // Token Declaration ///////////////////////////////////////////////////////////////////
-
- class Token { // Token class for defining and interpreting nodes within the matrix.
-
- public: // Beginning of Public stuff.
-
- int Check; // The first int is a check character.
- int Vector; // The second int is a vector.
-
- // isUnused() Returns true if the token is in an unused state.
-
- int isUnused() {
- return (Check==-1 && Vector==0) ? true : false;
- }
-
- // isTermination() Returns true if the token is in a termination state.
-
- int isTermination() {
- if(Check==0 && Vector > 0)
- return true;
- else
- return false;
- }
-
- // Symbol() Returns the symbol value for the token.
-
- int Symbol() { return Vector; }
-
- // Character() Returns the check character for this token.
-
- int Character() { return Check; }
-
- // End of Public stuff.
- // Note that no constructor is needed because the default constructor will do nicely.
-
- };
-
- ////////////////////////////////////////////////////////////////////////////////////////
- // Token Matrix Declaration ////////////////////////////////////////////////////////////
- ////////////////////////////////////////////////////////////////////////////////////////
- //
- // The Token Matrix loads, verifies, and maintains an array of tokens for the evaluators
- // to live in. This class provides safe access to the token matrix.
- //
- ////////////////////////////////////////////////////////////////////////////////////////
-
- class TokenMatrix {
-
- private:
-
- Token* Matrix; // Where we hold the token matrix.
- int MatrixSize; // What size is the matrix.
-
- public:
-
- // Exceptions...
-
- class BadAllocation : public runtime_error { // Exception for a bad memory allocation.
- public: BadAllocation(const string& w):runtime_error(w) {}
- };
- class BadMatrix : public runtime_error { // Exception for invalid matrix loads.
- public: BadMatrix(const string& w):runtime_error(w) {}
- };
- class BadFile : public runtime_error { // Exception for missing rulebase files.
- public: BadFile(const string& w):runtime_error(w) {}
- };
- class OutOfRange : public runtime_error { // Exception for indexes out of range.
- public: OutOfRange(const string& w):runtime_error(w) {}
- };
-
- // Standards...
-
- static const int SecuritySegmentSize = 1024; // File Authentication Segment
- static const int SecurityKeyBufferSize = 32; // Security Key Pad Block Size
- static const int RulebaseDigestSize = 64; // Number of bytes in digest.
-
- static const int MinimumValidMatrix = // Establish the smallest valid
- SecuritySegmentSize * 2 / SecurityKeyBufferSize; // matrix size
-
- // The first interface component checks the range and gives up the token.
-
- Token at(int x) { // Get the token at x
- if(x<0 || x>=MatrixSize) // Check to see if we're in bounds.
- throw OutOfRange("(x<0 || x>=MatrixSize)"); // If we're not then throw an exception.
- return Matrix[x]; // If we are then give it to them.
- }
-
- // The second interface component delivers the Matrix if it's valid so that other
- // code can manipulate it more efficiently (without constantly checking bounds.
-
- Token* getMatrix() { // Return the matrix.
- if(MatrixSize==0 || Matrix==NULL) // If the matrix isn't ready then
- throw BadMatrix("(MatrixSize==0 || Matrix==NULL)"); // throw an exception. If it is
- return Matrix; // ready then send it out.
- }
-
- // For simplicity we simply extend the underlying Token functions by taking a
- // position reference, checking it's range, and returning the result.
-
- int isUnused(int x) { // Extend Token.isUnused()
- return at(x).isUnused();
- }
-
- int isTermination(int x) { // Extend Token.isTermination()
- return at(x).isTermination();
- }
-
- int Symbol(int x) { // Exetend Token.Symbol()
- return at(x).Symbol();
- }
-
- int Character(int x) { // Extend Token.Character()
- return at(x).Character();
- }
-
- // Utility functions...
-
- int Size() { return MatrixSize; } // Returns the size of the matrix.
-
- void Load(const char* FileName); // Loads the matrix from a file name.
-
- void Load(string& FileName); // Loads the matrix from a file name string.
-
- void Load(ifstream& F); // Loads the token matrix from the file.
-
- void Validate(string& SecurityKey); // Validates the matrix with a key string.
-
- void Verify(string& SecurityKey); // Verifies the matrix digest.
-
- void FlipEndian(); // Converts big/little endian tokens.
-
- // Constructors...
-
- TokenMatrix() :
- Matrix(NULL),
- MatrixSize(0) { }
-
- TokenMatrix(ifstream& F) :
- Matrix(NULL),
- MatrixSize(0) {
- Load(F);
- }
-
- ~TokenMatrix() { // The Distructor...
- MatrixSize = 0; // Set the size to zero.
- if(Matrix) { delete [] Matrix; Matrix = NULL; } // If we have a matrix, remove it.
- }
-
- };
-
- /////////////////////////////////////////////////////////////////////////////////////////
- // End Token Work ///////////////////////////////////////////////////////////////////////
- /////////////////////////////////////////////////////////////////////////////////////////
-
- // Having defined the token matrix, I now define the Evaluator class which
- // be used to follow any matching rule threads as the program scans a a file.
- // A new evaluator is started at each position in the input stream making all
- // of the rules in the token matrix global.
-
- // The following two values are returned by the Evaluator at every step.
-
- const int WILD_WHITESPACE = 1; // Token code for whitespace wildcards.
- const int WILD_DIGIT = 2; // Token code for digit wildcards.
- const int WILD_LETTER = 3; // Token code for letter wildcards.
- const int WILD_NONWHITE = 4; // Token code for non-whitespace wildcards.
- const int WILD_ANYTHING = 5; // Token code for any character.
- const int WILD_INLINE = 6; // Token code for any character except new line.
-
- const int RUN_GATEWAY = 8; // Token code for run-loop gateways.
-
- // Here are some tuning parameters
-
- const int MaxWildRunLength = 4096; // Maximum span of "any number" wildcards.
- const int MAX_EVALS = 2048; // Maximum number of evaluators.
-
- //////////////////////////////////////////////////////////////////////////////////////////
- // Evaluators and the Evaluation Matrix
- //////////////////////////////////////////////////////////////////////////////////////////
-
- class EvaluationMatrix; // We've got to pre-declare this for some compilers.
-
- class Evaluator { // Evaluator class for following threads through the matrix.
-
- private:
-
- EvaluationMatrix* myEvaluationMatrix; // The evaluation matrix I live in.
- Token* Matrix; // The raw token matrix I walk in.
- int MatrixSize; // Size of raw token matrix.
-
- // 20070606 _M Optimized Evaluator code by reducing the strength of the
- // safety check from 3 comparisons to 1.
-
- unsigned int PositionLimit; // Largest CurrentPosition.
-
- // 20030216 _M Optimization conversions
-
- // 20140119 _M Deprecated by jump table in evaluator
- // inline int i_lower(); // { return myEvaluationMatrix->i_lower; }
- // inline bool i_isDigit(); // { return myEvaluationMatrix->i_isDigit; }
- // inline bool i_isSpace(); // { return myEvaluationMatrix->i_isSpace; }
- // inline bool i_isAlpha(); // { return myEvaluationMatrix->i_isAphpa; }
-
- unsigned int JumpPoint;
-
- int xLetter(); // Match Any letter.
- int xDigit(); // Match Any digit.
- int xNonWhite(); // Match Any non-whitespace.
- int xWhiteSpace(); // Match Any whitespace.
- int xAnyInline(); // Match Any byte but new line.
- int xAnything(); // Match Any character at all.
- int xRunGateway(); // Match the run-loop gateway.
-
- void doFollowOrMakeBuddy(int keyVector); // Follow and divide algorithm.
- void tryFollowingPrecisePath(unsigned short int i);
- void tryFollowingNoCasePath(unsigned short int i);
- void tryFollowingWildAlphaPath();
- void tryFollowingWildDigitPath();
- void tryFollowingWildNonWhitePath();
- void tryFollowingWildWhitePath();
- void tryFollowingWildInlinePath();
- void tryFollowingWildAnythingPath();
- void doFollowerJumpTable(unsigned short int i);
-
- public:
-
- // Standard Values...
-
- enum States { // These are the posible coditions.
- OUT_OF_RANGE, // We're outside the matrix - very bad.
- FALLEN_OFF, // We've fallen off the path and are lost.
- DOING_OK, // We're doing ok and following along.
- TERMINATED // We've reached the end of our path.
- };
-
- // Attributes...
-
- States Condition; // What state am I in? How's my health?
-
- Evaluator* NextEvaluator; // Linked List Pointer.
- unsigned int StreamStartPosition; // Indexes the position where we started.
- unsigned int CurrentPosition; // Indexes the node we are surfing.
-
- int WildRunLength; // Wildcard run length so far.
-
- // EvaluateThis() assumes it is being given the next character along the
- // path of a thread in the token matrix. It follows that thread and evaluates
- // it's condition.
-
- States EvaluateThis(unsigned short int i); // Follow the next byte.
-
- // isNoDuplicate() is used to keep us from allocating identical evaluators. This is
- // key to creating buddies when working with wildcards. It prevents us from recursively
- // proliferating evaluators at each new character when running in a wildcard loop.
-
- bool isNoDuplicate(unsigned int Position) { // Returns false if there is a duplicate.
- if(CurrentPosition == Position) // Obviously, if I match, then there's a dup.
- return false;
- // If I don't match and I'm the last one then
- if(NextEvaluator==NULL) // it must be true there are no dups. If there
- return true; // are more to ask then I'll let them answer.
- else
- return NextEvaluator->isNoDuplicate(Position);
- }
-
- Evaluator(unsigned int s, EvaluationMatrix* m); // Constructor...
-
- ~Evaluator(){
- if(NextEvaluator!=NULL){ // If there's more to this list then
- delete NextEvaluator; // delete it.
- }
- NextEvaluator = NULL; // Always null on exit.
- }
-
- };
-
- // A MatchRecord is created each time a new rule match occurrs. These records form a
- // linked list within the Evaluation Matrix that can be spit out after the process is
- // over for reporting purposes.
-
- class MatchRecord {
- public:
- int MatchStartPosition; // Where in the data stream did the match start?
- int MatchEndPosition; // Where in the data stream did the match end?
- int MatchSymbol; // What symbol was attached to the match rule?
-
- inline int RuleId(){return (MatchSymbol/SYMBOL_RANGE);} // Decode RuleID
- inline int RuleGroup(){return (MatchSymbol%SYMBOL_RANGE);} // Decode GroupID
-
- MatchRecord* NextMatchRecord;
-
- MatchRecord(int sp, int ep, int sym) { // When constructing a MatchRecord,
- MatchStartPosition = sp; // you must provide all of it's data.
- MatchEndPosition = ep;
- MatchSymbol = sym;
- // Since match records are always added to
- NextMatchRecord = NULL; // the end our next pointer is always NULL.
- }
-
- ~MatchRecord(){
- if(NextMatchRecord != NULL) // If there's more list, then delete it.
- delete NextMatchRecord;
- NextMatchRecord = NULL; // Clean up our pointer before leaving.
- }
- };
-
- // Now that we've created our utility classes, we'll create another class (with an instance)
- // that builds a matrix to evaluate all incoming characters, manage the list, and keeps
- // statistics and results from the execution process.
-
- class EvaluationMatrix {
-
- private:
-
- TokenMatrix* myTokenMatrix; // Token Matrix that I evaluate with.
-
- Evaluator* EvaluatorList; // Linked list of Evaluators.
-
- Evaluator* CurrentEvaluator; // Current Evaluator (when checking)
- Evaluator* PreviousEvaluator; // Previous Evaluator (when checking)
-
- // Evaluator Caching Mechanism.
-
- Evaluator* EvaluatorCache; // List of cached, ready evaluators.
- Evaluator* SourceEvaluator(int s, EvaluationMatrix* m); // Get a cached or new evaluator.
- void CacheEvaluator(Evaluator* e); // Cache a used evaluator.
-
- int CountOfEvaluators; // Current count of evaluators.
-
- int PassResult; // Result of the latest evaluation pass.
-
- MatchRecord* LastResultInList; // Keeps track of the end of the result list.
-
- MatchRecord* AddMatchRecord(int sp, int ep, int sym); // Add a match result.
-
- // DropEvaluator() is called by the EvaluateThis() method whenever an evaluator
- // reports the FALLEN_OFF result. The EvaluateThis() method keeps two values up
- // to date - one is the current evaluator (which will be dropped) and the other is
- // the previous evaluator (which will be updated to heal the list).
-
- // When we've finished this function, the CurrentEvaluator will be on the next
- // evaluator node if it exists. Therefore, the caller should skip it's normal
- // list itteration code when this function has been called.
-
- void DropEvaluator();
-
- public:
-
- // Exception classes...
-
- class BadAllocation : public runtime_error { // Allocation failed exception.
- public: BadAllocation(const string& w):runtime_error(w) {}
- };
- class MaxEvalsExceeded : public runtime_error { // Too many evaluators exception.
- public: MaxEvalsExceeded(const string& w):runtime_error(w) {}
- };
- class OutOfRange : public runtime_error { // Out of range exception.
- public: OutOfRange(const string& w):runtime_error(w) {}
- };
-
- // Attributes...
-
- int CountOfCharacters; // How many characters have been evaluated.
- int MaximumCountOfEvaluators; // Largest matrix size reached.
-
- MatchRecord* ResultList; // List of match results.
-
- int DeepSwitch; // true if we're doing a deep scans.
-
- // 20030216 _M High Level Conversion Optimizers...
-
- // 20140119 _M Deprecated by jump table in evaluator
- // int i_lower; // Lower case version of byte under test.
- // bool i_isDigit; // true if i is a digit.
- // bool i_isSpace; // true if i is whitespace.
- // bool i_isAlpha; // true if i is alpha.
-
- // AddEvaluator() is made public because the Evaluator object must have access
- // to it in order to handle the creation of buddies as it evaluates it's rules.
- // Similarly the getTokens is public because evaluators must use this when they
- // initialize. In a later version we will clean this up so that all of this stuff
- // can be handled somewhat more privately.
-
- Token* getTokens() { // Deliver the raw token matrix
- return myTokenMatrix->getMatrix(); // for use when creating evaluators.
- }
-
- int getMatrixSize() { // Deliver the raw matrix size
- return myTokenMatrix->Size(); // for use when creating evaluators.
- }
-
- Evaluator* AddEvaluator(int s, unsigned int m); // Adds a new evaluator to the top.
-
- Evaluator* InsEvaluator(int s, unsigned int m); // Inserts a new evaluator after the
- // current evaluator. (Only called by
- // an existing evaluator in process...)
-
-
- // isNoDuplicate(int p) checks for duplicate evaulators
-
- bool isNoDuplicate(unsigned int p) { // If there's no list there can be no
- if(EvaluatorList == NULL) // duplicates so we're true. If there is
- return true; // a list then we'll let the list answer.
- else
- return EvaluatorList->isNoDuplicate(p);
- }
-
- // EvaluateThis() Moves each evaluator with the current character and creates a new
- // evaluator for the current spot in the input file to make all rules global.
-
- int EvaluateThis(unsigned short int i);
-
- EvaluationMatrix(TokenMatrix* m) { // Constructor w/ pointer to Token Matrix...
-
- myTokenMatrix = m; // Grab my TokenMatrix.
-
- EvaluatorList = NULL; // Start off with no evaluators.
- EvaluatorCache = NULL; // Start off with no evaluator cache.
-
- CurrentEvaluator = NULL; // NULL means starting at the top.
- PreviousEvaluator = NULL; // NULL means previous is the top.
-
- ResultList = NULL; // Start off with no results in our list.
- LastResultInList = NULL;
-
- CountOfCharacters = 0; // The count of characters will be zero and
- MaximumCountOfEvaluators = 0; // the maximum Evaluator count will be zero
- CountOfEvaluators = 0; // and the current count will also be zero.
-
- PassResult = 0; // Initialize expecting no matches.
-
- }
-
- ~EvaluationMatrix(){ // Destructor to clean up memory allocations.
-
- myTokenMatrix = NULL; // Stop pointing at the TokenMatrix
-
- // Both of these lists konw how to delete themselves.
- // 20060531_M Fixed possible crash by checking for NULL before
- // deleting these lists. Also added cleanup for the EvaluatorCache.
-
- if(NULL!=EvaluatorCache) {
- delete EvaluatorCache; // Delete the evaluator cache.
- EvaluatorCache = NULL; // Then clear it's pointer.
- }
-
- if(NULL!=EvaluatorList) {
- delete EvaluatorList; // Delete the evaluator list.
- EvaluatorList = NULL; // Then clear it's pointer.
- }
-
- if(NULL!=ResultList) {
- delete ResultList; // Delete the result list.
- ResultList = NULL; // Then clear it's pointer.
- }
- }
-
- };
-
- // 20060531_M Implementation of the evaluator cache is all inline.
- // In place of new Evaluator() we now can use SourceEvaluator()
- // In place of delete Evaluator() we now can use CacheEvaluator()
- // The effect is to store previously allocaed evaluators in the EvaluatorCache
- // list so that they can be reused. This avoids the frequen use of
- // new and delete and allows us to skip a few extra cycles for initialization
- // because much of the constructor work for a new evaluator is already done
- // in any cached evaluator.
- //
- // In practice, at least one evaluator is likely to be created and destroyed
- // for each byte that is scanned. This new mechanism significantly reduces the
- // number of cycles that would normally be associated with those operations by
- // eliminating them most of the time. Instead of returning used memory to the
- // heap during delete, the evaulator is simply added to the cache list. Instead
- // of allocating new space from the heap and initializing the object, a chached
- // evaluator is simply moved from the cache into production. Moving into and
- // out of the cache is roughly as simple as changing a couple of pointers.
-
- // In place of new Evaluator, we do this...
-
- inline Evaluator* EvaluationMatrix::SourceEvaluator(int s, EvaluationMatrix* m) { // Get a cached or new evaluator.
- if(NULL==EvaluatorCache) return new Evaluator(s,m); // If we have no cache, use new!
- Evaluator* reuse = EvaluatorCache; // Otherwise grab a reusable one.
- EvaluatorCache = reuse->NextEvaluator; // Collaps the cache by one.
- reuse->NextEvaluator = NULL; // Clean it up a bit.
- reuse->StreamStartPosition = s; // Record our starting point.
- reuse->CurrentPosition = 0; // Reset the Current Position.
- reuse->WildRunLength = 0; // Reset the run length.
- reuse->Condition = Evaluator::DOING_OK; // Reset the condition.
- return reuse; // Return the reusable unit.
- }
-
- // In place of delete Evaluator, we do this...
-
- inline void EvaluationMatrix::CacheEvaluator(Evaluator* e) { // Cache a used evaluator.
- e->NextEvaluator = EvaluatorCache; // Link the used evaluator
- EvaluatorCache = e; // into the cache;
- }
-
- // In the above, the first evaluator added will get NULL as it's NextEvaluator.
- // When that first evaulator is used, the NULL pointer will return to the root
- // of the EvaluatorCache list. In this regard the cache acts like a stack.
-
- #endif
-
|